Kenwood SIRIUS KTC-H2A1 Instruction Manual page 16

To lock a stream, in Step 3 above, instead of momentarily pressing the SELECT button, hold the button for
more than 1 second. A "–" and a padlock will be displayed next to the stream number.
Lock Code Setup
If you have locked any streams in the Channel Lock
mode, you will need to enter a 4-digit lock code to
unlock them. The factory default lock code is "1 1 1 1".
You can change the Lock Code to your own preference:
1. While in the Setup Mode, press the left or right arrow but-
ton until the Lock Code Setup screen appears (top right):
2. Press the up or down arrow button. The Lock Code
screen appears (middle, right):
3. Using the preset 1 – 6 buttons, enter the factory
default code "1 1 1 1". The screen's second line will
change from "_ _ _ _" to "* * * *".
• If you enter an incorrect number, use the left arrow
button to delete the incorrect number; then
re-enter the correct one.
4. Press the Memory button. The Enter New Lock Code
screen appears (bottom, right).
• If you entered the code incorrectly, "Code Error" will
be displayed, and the Enter New Lock Code screen
30
Lock Code Setup Screen
Lock Code Screen
Enter New Lock Code Screen
Here Anywhere Instruction Manual (ver. 2)
2
reappears. Repeat Steps 3 – 4.
5. Using the preset 1 – 6 buttons, enter your new 4-digit
code. The screen's second line will change from
"_ _ _ _" to "* * * *".
6. Press the MEMORY button. The Confirm Number
screen appears (right).
7. Re-enter your new 4-digit code. The screen's second
line will change from "_ _ _ _" to "* * * *".
8. Press the MEMORY button. The display will change to "New Code Confirmed"
• If you entered the code incorrectly, "Code Error" will be displayed, and the Enter New Lock Code screen
reappears. Repeat Steps 5 – 8.
Startup Mode
You can select which screen is displayed when you turn Here
1. While in the Setup Mode, press the left or right arrow
button until the Startup Mode screen appears (right):
2. Use the up & down arrow buttons to highlight
the screen you want for Startup: Normal Operation,
Channel List (Stream List) or Category List
(see pages 17 – 18):
3. Press the SELECT button.
Here Anywhere Instruction Manual (ver. 2)
2
Confirm Number Screen
Anywhere's power on.
2
Startup Mode Screen
31