Toshiba E-STUDIO2020AC Manual page 15

1.Using Fingerprint Authentication Function
 Logging into the equipment by two-step authentication
You can log into the equipment using IC Card authentication or PIN Code authentication together while fingerprint
authentication is being carried out.
Perform authentication by following the instructions on the screen.
 Only IC Card authentication and PIN Code authentication can be used together with fingerprint authentication. Any
other types of authentication are not available.
 If there is no fingerprint, register one by logging into the equipment with the user name and password entered.
IC Card authentication
Pass an IC card over a card reader and place the finger on the fingerprint reader. Authentication is performed.
PIN Code authentication
Place the finger on the fingerprint reader. Enter a PIN code from the PIN code entry screen and press [OK].
Authentication is performed.
Using Fingerprint Authentication Function 15