Continuing Quick Start With An Ethernet Connection - Kenwood Sovereign Entre Install Manual

The "IP address", "subnet mask", gateway address", and
"DNS 1" fields are required.
Press . The Quick Start - Zip Code screen appears:
Enter your Zip Code in the field. To complete setup, press
automatically install Internet radio stations and download information about
FM/AM radio stations. When Entré is finished, the following screen will appear:
Press to begin enjoying Entré. If the connection is not successful, see
page 27.
How to Connect and Set Up Your Entré Entertainment Hub

Continuing Quick Start with an Ethernet Connection

If you have an Ethernet connection (DSL, cable modem, or LAN), Entré
automatically checks for a USB-to-Ethernet adapter before continuing. Once it
finds the adapter, the Quick Start - IP Addressing screen appears:
. Entré will
When your network uses a static IP address, it always connects Entré to the
Internet using the same IP address. Every Internet-connected device in your
home (your computer, for example) uses a unique IP address. The advantage of
this method is that you can be certain which IP address Entré uses. However,
you must keep track of which IP addresses you assign when adding new
devices.
When your network uses dynamic IP addresses, it uses a range of addresses to
connect Entré to the Internet. Each Internet-connected device in your home
will also connect using that range of addresses. The advantage to dynamic IP
addressing is that you don't have to remember which IP addresses you've
assigned. However, you must ensure that you have enough addresses to support
all of your devices.
How Do I Configure Internet Setup?
If there is no connected network detected, you must purchase
a USB-to-Ethernet adapter in order to connect to the Internet
with Entré. One compatible adapter is the CATC NetMate Link
(#U-ETH-NM02), which is available from Kenwood via the
Kenwood USA Web site at www.kenwoodusa.com. Go to the
Kenwood Shop link to purchase an adapter. For a list of other
compatible adapters, see the Kenwood USA Web site. Once
you have connected the adapter, press
Quick Start process.
to return to the
25