Irenis Blankom IGS-900 Technical Data Sheet And Operation Manual
  1. Manuals
  2. Brands
  3. Irenis Manuals
  4. Gateway
  5. Blankom IGS-900
  6. Technical data sheet and operation manual

Irenis Blankom IGS-900 Technical Data Sheet And Operation Manual

Tuner to ip gateway
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
IGS-900 Tuner to IP Gateway
Datasheet and operation Manual
V 1.6
1 / 52

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Blankom IGS-900 and is the answer not in the manual?

Questions and answers

Related Manuals for Irenis Blankom IGS-900

Summary of Contents for Irenis Blankom IGS-900

  • Page 1 IGS-900 Tuner to IP Gateway Datasheet and operation Manual V 1.6 1 / 52...

  • Page 2: Table Of Contents

    IGS-900 16 DVB Tuner to IP-Out Table of Content TABLE OF CONTENT ......................2 INTRODUCTION: ....................... 3 FEATURES ......................... 3 SPECIFICATIONS (DVB-T/T2/C UPON REQUEST) ..............4 SAFETY AND OTHER RECOMMENDATIONS: ................ 5 IMPORTANT NOTES! ......................5 QUICK-START INSTALLATION: ..................... 8 NETWORK SETUP: ......................

  • Page 3: Introduction

    Gbe output. The BLANKOM IGS-900 is also characterized with a high integration level, high performance and very cost effective. This streamer is very adaptable to new generations of IPTV headend systems i.e. in hospitality environments serving FreeToAir (FTA) content and BISS encrypted Services.

  • Page 4: Specifications (Dvb-T/T2/C Upon Request)

    IGS-900 16 DVB Tuner to IP-Out Specifications ( DVB-T/T2/C upon request) Optional 1: 16 DVB-S/S2x tuners input +2 ASI input---SPTS output Input Optional 2: 14 DVB-S/S2x tuners input +2 ASI input --- MPTS output Optional 3: 16 DVB-S/S2x tuners input --- MPTS output Input Frequency 950-2150MHz QPSK/8PSK /16APSK :0.5...45 MSps...

  • Page 5: Safety And Other Recommendations

    (such as translation, transformation or adaptation) without the written permission from Blankom / IRENIS GmbH. IRENIS GmbH reserves the right to revise this publication and make changes in its content from time to time, whereby it shall not be obligatory for IRENIS GmbH to provide notification of such revision or change.
  • Page 6 IGS-900 16 DVB Tuner to IP-Out guidelines for the installation and operation of such systems is the responsibility of the installer and/or the operator. In particular, the regulations and guidelines applicable in the respective countries for commissioning, especially for the power connection, and all standards and laws related to the products must be complied with.
  • Page 7 IGS-900 16 DVB Tuner to IP-Out Installation Notes All types of the IRENIS-BLANKOM family are 19“devices with 1 RU height designed for installation in 19” racks. In addition to the front panel screws, an internal module support is required at the rack.

  • Page 8: Quick-Start Installation

    IGS-900 16 DVB Tuner to IP-Out Quick-Start Installation: The user can control and set the configuration of the device with any computer by connecting to the web server-Interface (WebIF) by the 100BaseT NMS Port. The user should ensure that the computer’s IP address is different from other device’s IP address;...
  • Page 9 IGS-900 16 DVB Tuner to IP-Out Manually reboot and maybe better to safe the config first? Internally and external: The file can be uploaded by LOAD CONFIGURATION. The Safe-Restore menu is self-explaning: It internally SAVEs or RESTORE the settings. Author: Ralf August 29, 2022 Riedel subject to technical changes might happen w/o further notice...
  • Page 10 IGS-900 16 DVB Tuner to IP-Out Load an external previously saved config is almost better: Try and error ;-( Reason: We have changed the SPTS mode to MPTS operation and that doesn't accept the previous saved settings from the SPTS mode. So, we go back to SPTS. Just to show the difference for MPTS –...
  • Page 11 IGS-900 16 DVB Tuner to IP-Out Note: Depending on installed Firmware, the Stream output selection may be different: Instead of IP stream there will be SPTS select. By click on the service name a popup opens: Author: Ralf August 29, 2022 Riedel subject to technical changes might happen w/o further notice Filename: Blankom_IGS-900-16_Tuner_to_IP_Gateway_user_manual2022-05RR.docx...
  • Page 12 IGS-900 16 DVB Tuner to IP-Out So, the IP output settings of each stream can be modified here. For RTSP-mode please note, that the receiver needs to be in the same subnet like the selected GbE Data port like here: Author: Ralf August 29, 2022 Riedel...
  • Page 13 IGS-900 16 DVB Tuner to IP-Out So, the first stream can be received by rtsp://192.168.2.137:5000/1 But your receiver needs to be part of it: Author: Ralf August 29, 2022 Riedel subject to technical changes might happen w/o further notice Filename: Blankom_IGS-900-16_Tuner_to_IP_Gateway_user_manual2022-05RR.docx Page 13...
  • Page 14 IGS-900 16 DVB Tuner to IP-Out Rtsp://192.168.2.137:5000/2 is the address of the 2 stream and so on until max.= 512 streams. Back to the selection of the mode MPTS or SPTS streams: Author: Ralf August 29, 2022 Riedel subject to technical changes might happen w/o further notice Filename: Blankom_IGS-900-16_Tuner_to_IP_Gateway_user_manual2022-05RR.docx Page 14...
  • Page 15 IGS-900 16 DVB Tuner to IP-Out REAR -> OFF –ON Power toggling performs a hard reset. Success… Backup config… Author: Ralf August 29, 2022 Riedel subject to technical changes might happen w/o further notice Filename: Blankom_IGS-900-16_Tuner_to_IP_Gateway_user_manual2022-05RR.docx Page 15...

  • Page 16: Network Setup

    IGS-900 16 DVB Tuner to IP-Out Network Setup: We assume that the user is familiar with IP settings and already knows his own system to connect the unit to. If you use the Output Streaming: We recommend using 2 separate Switches! At least a 100BaseT for the Management NMS RJ45 port and a second one with Gigabit Ethernet 10/100/1000BaseT with at least Layer 2+ with IGMP V2 features.

  • Page 17: Changing User-Account

    IGS-900 16 DVB Tuner to IP-Out Changing user-account: Change it to your needs, but do not forget the password otherwise you would need to reset the unit with the Front-panel RESET switch (press it min. 10…15 sec) to factory default. DVB-C / T Tuning is slightly different and you need to enter the center- frequency of the to be received DVB-C/QAM channel.

  • Page 18: Tuner-Setup

    IGS-900 16 DVB Tuner to IP-Out Tuner-Setup: Using a Multiswitch with more than one SAT-position and > 16 outputs: You can set every single Tuner Input individually. Using a SAT-Splitter: Be carefully, active splitter needs at least one 13V…18V DC connection to it to operate.
  • Page 19 IGS-900 16 DVB Tuner to IP-Out We are using a 1-8 active splitter here and so we have to take care, that the first 8 inputs will be setup to tune the same polarization and set the first Input to it LOW-Band =9750 MHz LNB-IF frequency (while HIGH-band is almost 10600.000MHz using 22KHz signal): The next is: ->...
  • Page 20 IGS-900 16 DVB Tuner to IP-Out Following 7 tuner INPUTS at the splitter do not need DC. Example to tune to a second Satellite, here with connected Input no. 9 directly to a Multiswitch w/o using a splitter: chosing HIGH-Band (the High- and Low-Band are seperated. High band starts at 11700 MHz), 12437 MHz, 10600 SAT-IF, 29900 SBR SET! Author: Ralf...
  • Page 21 IGS-900 16 DVB Tuner to IP-Out Remark: do not recommend to Loop-outputs to serve the next RF Input because of it is too much attenuation - mostly. The reception might fail because of a too weak signal input. Now we have configured 9 of 16 Inputs: DVB-C Tuning: Of course, you need the proper DVB-tuner installed instead of SAT: Select your RF-Mode: Then we enter the known parameter: Modulation here DVB-C-J83A/C, Centre Freq.: 650MHz...
  • Page 22 IGS-900 16 DVB Tuner to IP-Out Example here with only one TV Service from our encoder Modulator: Parse the input to get the content information: Switch off PIDremapp and CA filter if your Input RF does not contain encrypted channel PIDs and does not overlap in PID-numbers with other to be received RF Channels in DVB-C/T/T2 or ISDB-Tb or …...
  • Page 23 IGS-900 16 DVB Tuner to IP-Out We recommend not to use same MultiCast-IP Addresses but also different ones and so the ports as well: Bad example for GBE1+2: Author: Ralf August 29, 2022 Riedel subject to technical changes might happen w/o further notice Filename: Blankom_IGS-900-16_Tuner_to_IP_Gateway_user_manual2022-05RR.docx Page 23...

  • Page 24: Asi-Input(S)

    IGS-900 16 DVB Tuner to IP-Out Note: The both GbE outputs are some kind of mirrors and are not independent from each other. Note Samsung Hospitality TV’s like to start with 225.x.x.x instead of 224.x.x.x! So 225.0.0.1:10001 … 225.0.0.2:10002 … is a good idea. Of course you can have other inputs like ASI to demultiplex and stream to UDP Multicast.
  • Page 25 IGS-900 16 DVB Tuner to IP-Out Input Streams, please uncheck them. PID Remapping isn’t almost necessary for SPTS streaming. In MPTS mode it can avoid overlapping PID-Re-Multiplex problems. DVB-professionals know that … You need to parse every single Input content by selecting the Input (Tuner/ASI) and PARSE see the content and more info: Now we sent this to the output on the right side: Author: Ralf...

  • Page 26: Stream Output Settings

    IGS-900 16 DVB Tuner to IP-Out proceed with all Inputs to generate your favorite Streams… Finally, you'll get an overview how many you have selected from which input left to the outputs right: Now it’s time to configure your Stream output settings: The RTSP-streams can be unicast received by GBE1 out or GBE2 by selecting the output service out:...

  • Page 27: Addon: Biss Decryption

    IGS-900 16 DVB Tuner to IP-Out Proceed with all of them, filter unwanted PIDs, I hope we know what you are doing … SAVE and go. Now it is Time to SAFE yourself before your kid is cutting the power source accidently: Addon: BISS decryption: You can insert different BISS keys and finally select the outputs, which should be "de- biss’ed"...

  • Page 28: Check The Streams

    IGS-900 16 DVB Tuner to IP-Out Check the streams: Inputs: SPTS outputs: Author: Ralf August 29, 2022 Riedel subject to technical changes might happen w/o further notice Filename: Blankom_IGS-900-16_Tuner_to_IP_Gateway_user_manual2022-05RR.docx Page 28...
  • Page 29 IGS-900 16 DVB Tuner to IP-Out Using Dektec Fantasi with stream-expert, GE2 disconnected, 1 = ONE (SD) udp://224.2.2.2:3004 13= ONEHD udp://224.2.2.2:3052 and others… Author: Ralf August 29, 2022 Riedel subject to technical changes might happen w/o further notice Filename: Blankom_IGS-900-16_Tuner_to_IP_Gateway_user_manual2022-05RR.docx Page 29...
  • Page 30 IGS-900 16 DVB Tuner to IP-Out Almost OK… RTSP screenshots: first is in MPTS, 2 a SPTS stream Author: Ralf August 29, 2022 Riedel subject to technical changes might happen w/o further notice Filename: Blankom_IGS-900-16_Tuner_to_IP_Gateway_user_manual2022-05RR.docx Page 30...

  • Page 31: Software Updates

    IGS-900 16 DVB Tuner to IP-Out Software Updates: IRENIS GmbH does not publish Soft- and Firmware-upgrades online. If you face some problems, please sent us a bug-report along with all necessary data of the device(s). Nevertheless, here how it works for this unit: The update files are 3.
  • Page 32 IGS-900 16 DVB Tuner to IP-Out + safe to file: Than update IGS-900_Base_System_Firmware_encr_v01.01.02.07.pkg first: Author: Ralf August 29, 2022 Riedel subject to technical changes might happen w/o further notice Filename: Blankom_IGS-900-16_Tuner_to_IP_Gateway_user_manual2022-05RR.docx Page 32...
  • Page 33 IGS-900 16 DVB Tuner to IP-Out 2. Power off and on. 3. Default IP is 192.168.0.136, enter WEB GUI Author: Ralf August 29, 2022 Riedel subject to technical changes might happen w/o further notice Filename: Blankom_IGS-900-16_Tuner_to_IP_Gateway_user_manual2022-05RR.docx Page 33...
  • Page 34 IGS-900 16 DVB Tuner to IP-Out -->Firmware - Menu, update IGS-900_16xTuner_IP_cpu_SPTS_v1.21_MPTS_v2.22_20180726.bin and IGS-900_16xTuner_IP_fpga_SPTSv1.50_MPTSv2.30_20171031.fpga. 4. Power off and on again. Finished: Don’t be confused, ‘Hardware-Version’ shows actual FPGA –Software version. 5. Default IP is still 192.168.0.136. Author: Ralf August 29, 2022 Riedel subject to technical changes might happen w/o further notice Filename: Blankom_IGS-900-16_Tuner_to_IP_Gateway_user_manual2022-05RR.docx...
  • Page 35 IGS-900 16 DVB Tuner to IP-Out Remark: If you accidently lost NMS IP address, you can RESET the device to its factory defaults by pressing the RESET-Button @ the front panel > 15 seconds. Author: Ralf August 29, 2022 Riedel subject to technical changes might happen w/o further notice Filename: Blankom_IGS-900-16_Tuner_to_IP_Gateway_user_manual2022-05RR.docx Page 35...

  • Page 36: Annex Mpeg

    IGS-900 16 DVB Tuner to IP-Out ANNEX MPEG MPEG PSI/SI Information’s: We assume, that the user is familiar with all abbreviations mentioned in this manual. Author: Ralf August 29, 2022 Riedel subject to technical changes might happen w/o further notice Filename: Blankom_IGS-900-16_Tuner_to_IP_Gateway_user_manual2022-05RR.docx Page 36...

  • Page 37: Recommendations

    IGS-900 16 DVB Tuner to IP-Out Recommendations: Multicast capable Switch As a we recommend is the HP (ARUVA) 2530 24G or 48G. (For Floor switches we have an own branded one and support IGMP as well) IGMP should be set to ON in the port configs.
  • Page 38 IGS-900 16 DVB Tuner to IP-Out Registries included below • Local Network Control Block (224.0.0.0 - 224.0.0.255 (224.0.0/24)) • Internetwork Control Block (224.0.1.0 - 224.0.1.255 (224.0.1/24)) • AD-HOC Block I (224.0.2.0 - 224.0.255.255) • RESERVED (224.1.0.0-224.1.255.255 (224.1/16)) • SDP/SAP Block (224.2.0.0-224.2.255.255 (224.2/16)) •...
  • Page 39 IGS-900 16 DVB Tuner to IP-Out Registered port A registered port is a network port (a sub-address defined within the Internet Protocol, in the range 1024–49151) assigned by the Internet Assigned Numbers Authority (IANA) (or Internet Corporation for Assigned Names and Numbers (ICANN) before March 21, 2001, or by USC/ISI before 1998) for use with a certain protocol or application.
  • Page 40 IGS-900 16 DVB Tuner to IP-Out "Source port" is optional in IPv4 (pink background in table). In IPv6 only the source port is optional (see below). Source port number This field identifies the sender's port when meaningful and should be assumed to be the port to reply to if needed.
  • Page 41 IGS-900 16 DVB Tuner to IP-Out any port (even, not odd > 1024) Note: Regarding SAP (Session Announcement Protocol) IPv4 global scope sessions use multicast addresses in the range 224.2.128.0 - 224.2.255.255 with SAP Announcements being sent to 224.2.127.254 Port 9875 (note that 224.2.127.255 is used by the obsolete SAPv0 and MUST NOT be used).

  • Page 42: Installation Guide For F-Connectors

    IGS-900 16 DVB Tuner to IP-Out Installation guide for F-connectors: / Installationshinweis für den F-Anschluß: The LNC –connectors are almost marked as: Die LNB-Anschlüsse sind meist entsprechend gekennzeichnet HH= Horizontal High-Band HL = Horizontal Low-Band = LH VL = Vertical Low-Band = LV VH= Vertical High-Band = HV Electronic equipment is not household waste - in accordance with directive 2002/96/EC OF THE EUROPEAN PARLIAMENT AND THE COUNCIL dated 27th January 2003 on used electrical and electronic...
  • Page 43 IGS-900 16 DVB Tuner to IP-Out Appendix A Product Disposal Warning! Ultimate disposal of this product should be handled according to all national laws and regulations. 製品の廃棄 この製品を廃棄処分する場合、国の関係する全ての法律・条例に従い処理する必要があります。 警告 本产品的废弃处理应根据所有国家的法律和规章进行。 警告 本產品的廢棄處理應根據所有國家的法律和規章進行。 Warnung Die Entsorgung dieses Produkts sollte gemäß allen Bestimmungen und Gesetzen des Landes erfolgen. ¡Advertencia! Al deshacerse por completo de este producto debe seguir todas las leyes y reglamentos nacionales.

  • Page 44: Installation And Safety Instructions / Montage Und Sicherheitshinweise

    IGS-900 16 DVB Tuner to IP-Out Installation and safety instructions / Montage und Sicherheitshinweise • Die beschriebenen Geräte dienen ausschließlich der Installation von Satelliten-Empfangsanlagen. • The equipment described is designed solely for the installation of satellite receiver systems. • Jegliche anderweitige Nutzung oder die Nichtbeachtung dieses Anwendungshinweises hat den Verlust der Gewährleistung bzw.
  • Page 45 IGS-900 16 DVB Tuner to IP-Out • Für die Gerätekühlung muß freie Luftzirkulation möglich sein. Überhitzungsgefahr! • Free circulation of air must be possible to discharge the heat emitted by the unit. Risk of overheating! • Zulässige Umgebungstemperatur -20 bis +50°C •...

  • Page 46: Umrechnungstabelle Dbµv <-> Dbm / Conversions Of Power @ 75Ω

    IGS-900 16 DVB Tuner to IP-Out Conversions of Power @ 75Ω Umrechnungstabelle dBµV <-> dBm / dBmV dBµV 75Ω mW 75Ω -40.75 2.51 8.4E-05 -39.75 2.82 1.1E-04 -38.75 3.16 1.3E-04 -37.75 3.55 1.7E-04 -36.75 3.98 2.1E-04 -35.75 4.47 2.7E-04 -34.75 5.01 3.3E-04 -33.75...
  • Page 47 IGS-900 16 DVB Tuner to IP-Out dBmV dBµV 75Ω mW 75Ω -9.75 89.13 0.106 -8.75 100.00 0.133 -7.75 112.20 0.168 -6.75 125.89 0.211 -5.75 141.25 0.266 -4.75 158.49 0.335 -3.75 177.83 0.422 -2.75 199.53 0.531 -1.75 223.87 0.668 -0.75 251.19 0.841 0.25 281.84...
  • Page 48 IGS-900 16 DVB Tuner to IP-Out Sicherheitshinweise Sicherheitshinweise bitte vor Montage bzw. Inbetriebnahme des Gerätes sorgfältig lesen und befolgen. 1.Installation Gefahr: Das Gerät darf ausschließlich von sachverständigen Personen (siehe EN 60065), installiert und in Betrieb genommen werden. Gefahr: Das Gerät und/oder die Verteilperipherie muss vor Inbetriebnahme gemäß EN 60728-11 vorschriftsmäßig geerdet sein (Potentialausgleich) und bleiben, auch wenn das Gerät ausgebaut wird.

  • Page 49: Contact

    Gefahr eines elektrischen Schlags (Lebensgefahr) und Brandgefahr. Warnung (Bei optischen Sendern sowie deren Verteilperipherie): ziehen Sie den Netzstecker bevor das Gerät ausgebaut wird. Bei Fragen zur Reparatur wenden Sie sich an den IRENIS-Service: E-Mail: info@blankom.de , Kontakt: www.blankom.de 5. Verkauf Vorsicht: Im Falle eines Verkaufs müssen diese Sicherheitshinweise und die Bedienungsanleitung des entsprechenden Geräts dem Käufer ausgehändigt...

  • Page 50: Ce Declaration

    IGS-900 16 DVB Tuner to IP-Out CE Declaration Author: Ralf August 29, 2022 Riedel subject to technical changes might happen w/o further notice Filename: Blankom_IGS-900-16_Tuner_to_IP_Gateway_user_manual2022-05RR.docx Page 50...

  • Page 51: Dvb-C Channel Plan

    IGS-900 16 DVB Tuner to IP-Out DVB-C Channel plan Anyway, we should adjust the QAM Channels according to the ITU Cenelec Channel line ups, so that TV sets can easier tune by using the default channel lists: Example starting with That’s enough for 16 channels.
  • Page 52 IGS-900 16 DVB Tuner to IP-Out Author: Ralf August 29, 2022 Riedel subject to technical changes might happen w/o further notice Filename: Blankom_IGS-900-16_Tuner_to_IP_Gateway_user_manual2022-05RR.docx Page 52...

Table of Contents