Panel Function Description - Cerio DT-400 A1 Quick Start Manual

2. Panel Function Description

1. Reset button (Please press and hold for about 15 seconds and then release)
2. Wireless signal on /off button
3. 5 RJ-45 Ethernet connections Port
 If select used Router AP mode then Eth1 is WAN Port, other Eth2-5 is LAN Ports.
 If select used Access Point mode the Eth1-5 is LAN Port
 If select Access Point mode and used authentication function then Eth1 must connect to
Router.
Hardware power
4.
5. 12V / 1A DC input power
6. 2.4G/5G dual-band Omni antenna x2
V1.0a
V1.0a
1
2
on/off button
6
3 5
4