Pyle PHSKR14 User Manual page 16

Selecting a Program to Copy:
Move the Direction cursor over the program to be copied. If only some of the
program is to be copied, move the cursor over the upper program selection, then
press con rm to cancel the selection. Press the Direction buttons on the remote
control to select the program to be copied, then press the Con rm button.
Copy:
Move the highlight bar to "START" option; at this time the information about this
copy will be shown on the right hand Side (TOTAL TRACKS, TOTAL TIME and
TOTAL SIZE). Then press "ENTER" key to start copying and the system will write
the CD in MP3 format onto the designated USB. When copying at normal speed,
you can listen to the content to be copied at the same time; when selecting 4x
speed, it will be muted.
Please note:
When you press the "ENTER" key to switch speeds, there will be a slight sound
which continues for a few seconds.
Cancel Copy:
During copy, you can move the highlight bar to "CANCEL" option and press
"ENTER" key to con rm.
Return from Copying Screen:
Move the highlight bar to "RETURN" option and press "ENTER" key to con rm
return.
Please note:
Before copying, ensure that the available space on the USB is enough for the size
of the le(s) to be copied.
16
www.PyleUSA.com