Table of Contents
Advertisement
TROUBLESHOOTING
Before repairing, please take a look at the following problems and possible
solutions rst.
NO.
PROBLEM
1.
"No Disc"
displayed on
screen.
2.
No sound.
USB COPY
1. The USB storage capacity range must not exceed 16GB.
2. Only insert a USB where there is no disc in the tray.
3. Press "MODE" button on the unit or "SOURCE" on the remote control:
DVD and USB will appear on the TV screen. Please use " " and " " buttons to
select USB. Then press "ENTER" for the USB to be read.
Please note: If a disc needs to be read after a USB has been read, please press
"MODE" on the unit or" SOURCE" on the control and use " " and " " buttons to
select DVD.
To Copy an MP3 File:
When playing an MP3 disc, press "COPY" button on the remote and enter the
copy selection interface; the content that can be copied are the tracks of the
current disc being played.
SOLUTION
If you place the disc on the tray and the player displays "NO
DISC" once loaded:
1. Check whether the disc is placed correctly (label side up).
2. Check the format of the disc.
3. Check whether the disc is dirty or damaged.
4. Clean the lens - this usually needs to be done after 20
hours of playback.
1. Set to current connecting channel.
2. Replace audio connection or connect correctly.
3. Ensure connected unit works properly or turn volume up.
www.PyleUSA.com
15
Advertisement
Table of Contents
