Nemtek Strainrite AGRI Solar Instruction Manual page 11

AGRI Solar
AGRI Solar AGRI Solar
INTRODUCTION
Thank you for choosing our product! NEMTEK Electric Fence Energizers are designed and
manufactured to provide many years of reliable use, if installed and maintained correctly. The
guidelines provided in this manual will assist you with the basic operation and maintenance of
your energizer.
Currently this energizer is designed and manufactured in South Africa for the South African and
international markets. More information on our products and general information are available
on our web site at: http://www.nemtek.com.
COMPANY PROFILE
The NEMTEK Group of Companies manufacture and distribute intelligent electronic agricultural
fencing systems, security and perimeter control systems and have been involved in the security
industry since 1990.
We have our own research and development team, designing and manufacturing a full range of
The Nemtek tag is used to toggle the energizer on/off or to toggle the energizer between
The Nemtek tag is used to toggle the energizer on/off or to toggle the energizer between
the low or high power operating state. Hold the tag over the Nemtek logo on the front of
globally competitive electric fence energizers and related products.
the low or high power operating state. Hold the tag over the Nemtek logo on the front of
the energizer and the energizer will emit a short beep upon detecting the tag.
the energizer and the energizer will emit a short beep upon detecting the tag.
NEMTEK is continually updating its products according to South African and international
To toggle the energizer on or off, remove the tag after this first beep and the energizer
To toggle the energizer on or off, remove the tag after this first beep and the energizer
standards in order to ensure the highest quality products and continuous customer satisfaction.
will emit a further beep when turning on, or a double beep when turning off.
will emit a further beep when turning on, or a double beep when turning off.
To toggle the low/high power operating state of the energizer, keep presenting the tag
To toggle the low/high power operating state of the energizer, keep presenting the tag
Electric fencing can be lethal. Avoid head contact with the fence. When installing
after the initial detection beep. After about 1.5 second has passed, a long beep will be
after the initial detection beep. After about 1.5 second has passed, a long beep will be
please take careful note of the options available for current limiting resistors, the
emitted. The tone of this long beep will be low if the energizer has switched to low
emitted. The tone of this long beep will be low if the energizer has switched to low
programmable output energy levels as well as the low-voltage operation of the
power mode or high if the energizer has switched to high power mode. Once active, the
power mode or high if the energizer has switched to high power mode. Once active, the
energizer.
(ENERGIZER) LED will pulse green if the energizer is in high power mode or red if the
(ENERGIZER) LED will pulse green if the energizer is in high power mode or red if the
energizer is in low power mode.
energizer is in low power mode.
In order to extend the battery operating life of the energizer, The BATTERY and SOLAR
In order to extend the battery operating life of the energizer, The BATTERY and SOLAR
indicators will only remain active for 1 minute each time the Nemtek Tag is presented to
indicators will only remain active for 1 minute each time the Nemtek Tag is presented to
the energizer. The indicators do however remain active, should solar power be present
the energizer. The indicators do however remain active, should solar power be present
and the energizer is not actively pulsing the fence.
and the energizer is not actively pulsing the fence.
Using the Nemtek Tag
Introduction & Company Profile Using the Nemtek Tag
Energizer
Energizer
11
11 3
Tag
Tag