Advertisement
CHARGING
The indication light will flash red to indicate the unit needs to be charged.
1. Plug the cable into the DC Jack before connecting to the USB power
point or 5V/2A adaptor (not included).
2. Once connected properly
the indication light will
turn red to indicate that the
unit is being charged.
Note: The Nomad operates most efficiently with a 5V/2A cable/adaptor.
The Nomad can be used with a 5V/1A cable/adaptor but this will increase
the charge time.
3. The indication light will turn green
to indicate the unit is fully charged
(time to fully charge approx. 3.5 hours)
Advertisement
