Honda CBF300NA 2023 Owner's Manual page 36

Instruments
To change the setting mode B, turn the
a
ignition switch to the (On) position while
pressing button until the display check
SEL
is finished. The blinking of bar segment in
the tachometer shows the currently applied
REV indicator lighting RPM, and the
numerical tachometer display shows it.
Tachometer bar segment is displayed as
u
conventional display, regardless of set up
display method.
32
(Continued)
Each time button is pressed, the
SEL
b
lighting RPM set value increase by
250 r/min (rpm) (one segment). When the
lighting RPM set value exceeds the allowable
range, the lighting RPM set value
automatically returns to 4,000 r/min (rpm).
Press and hold
u
the lighting RPM set value fast.
Available Setting Range
4,000 -to- 10,500 r/min (rpm)
button to advance
SEL