GE AEM08LQ Owner's Manual & Installation Instructions page 5

Features and appearance will vary.
Controls (on some models)
Mode Control
High Cool and Low Cool provide cooling with
different fan speeds .
Fan settings provide air circulation and filtering
without cooling .
NOTE: If you move the mode control from a cool
setting to OFF or to a fan setting, wait at least
3 minutes before switching back to a cool
setting .
Cooling Descriptions
For Normal Cooling—Select High Cool or Low
Cool with the TEMPERATURE control at midpoint .
For Maximum Cooling—Select High Cool with
the TEMPERATURE control at the highest number
available on your knob .
For Quieter and Nighttime Cooling—Select Low
Cool with the TEMPERATURE control at midpoint .
MODE CONTROL TEMPERATURE CONTROL
TEMP Control
The TEMP control is used to maintain the room
temperature . The compressor will cycle on
and off to keep the room at the same level of
comfort . When you turn the knob to a higher
number, the indoor air will become cooler . Turn
the knob to a lower number and the indoor air
will become warmer .
GEAppliances.com
5