X-media XM-EN2279 User Manual

X-media XM-EN2279 User Manual

Usb sata hdd/ssd external enclosure

Advertisement

Quick Links

User Guide
USB SATA HDD/SSD External Enclosure
Model No.: XM-EN2279
XM-EN2279U3
Version 1.0

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the XM-EN2279 and is the answer not in the manual?

Questions and answers

Summary of Contents for X-media XM-EN2279

  • Page 1 User Guide USB SATA HDD/SSD External Enclosure Model No.: XM-EN2279 XM-EN2279U3 Version 1.0...
  • Page 2 USB SATA HDD/SSD External Enclosure Contents Package Contents ......................3 Chapter 1 Product Overview …….………………….….……………………….………………………… 3 1.1 Introduction ……………………….…………………………………….………………….. 3 1.2 Features …….………………….….…..……………………………………………………… 4 1.3 System Requirement ………………...……………………………….…………………. 4 Chapter 2 Installation Guide ………………..…………………………………………..………………….. 4 2.1 Hardware Installation …………….………..……….……………………..………….. 4 2.2 Driver Installation ………….………………..…………………….…………..…………...
  • Page 3 Conventions The “Enclosure” mentioned in this User Guide stands for following products: XM-EN2279 or XM-EN2279U3 without any explanations. All these devices are sharing this User Guide. All product models listed just differ in appearance and figure in this User Guide.
  • Page 4 USB SATA HDD/SSD External Enclosure 1.2 Features  Support most 2.5” 7mm/9.5mm SATA HDD/SSD  USB 2.0 data transfer rate up to 480Mbps (Model: XM-EN2279)  USB 3.0 data transfer rate up to 5Gbps (Model: XM-EN2279U3)  Tool Free case design for easy installation ...
  • Page 5 USB SATA HDD/SSD External Enclosure Figure 2 Place your 2.5” SATA hard disk into the Enclosure and then slide it into SATA connector. Closing the top panel will push in the hard disk to have tight contact with SATA connector of PC Board. Figure 3 Note: If you are installing 2.5”...
  • Page 6 USB SATA HDD/SSD External Enclosure Figure 5 Connect the USB cable from the Enclosure to the computer system. 2.2 Driver Installation No driver installation is required for USB enabled computer systems, as this enclosure uses natively installed driver. Supported operating systems should automatically detect and install the enclosure.
  • Page 7 USB SATA HDD/SSD External Enclosure 2.4 Using the Enclosure If you are using a brand new hard disk that doesn’t contain any data, then you will first need to prepare the hard disk for use. From the main desktop, right-click on “Computer”, then select Manage. In the new Computer Management window, select Disk Management from the left window panel.

This manual is also suitable for:

Xm-en2279u3

Table of Contents