Before You Begin; Preparation; Additional Materials You May Need; Installations - GE GFB760V Owner's Manual & Installation Instructions

Installation
Instructions
If you have questions, call 1-800-GECARES or visit our Website at: www.GEAppliances.com

BEFORE YOU BEGIN

Read these instructions completely and carefully.
IMPORTANT –
•
instructions for local inspector's use.
IMPORTANT –
•
governing codes and ordinances.
Note to Installer –
•
instructions with the Consumer.
Note to Consumer –
•
for future reference.
Skill level –
• Installation of this appliance
required basic mechanical skills.
Completion time –
•
• Proper installation is the responsibility of the
installer.
• Product failure due to improper installation is not
covered under the Warranty.

PREPARATION

1. Disconnect electrical power supply to disposer.
2. Remove old disposer or sink fl ange assembly.
3. Inspect drain line. If it is heavily coated with
hardened grease and accumulations, rout out
with a plumber's snake.
4. Remove old sealing materials and gasketing from
sink opening, both top and bottom.
NOTE:
Top and bottom of sink surfaces must be free
of any materials to prevent leaks.
4
Save these
Observe all
Be sure to leave these
Keep these instructions
1 hour
WHAT YOU WILL NEED
• Phillips and fl at blade screwdriver
• Channel lock pliers, slip joint
• Nut driver
ADDITIONAL MATERIALS YOU
MAY NEED
• Steel punch or wooden dowel
• Petroleum jelly or liquid soap
• Hose clamp
• Dishwasher drain connector
• Adjustable pipe wrench
• Plumber's putty (for cast sinks)
• Stepped rubber drain adapter
• Wire nuts
• Cable connector
• Flexible drain pipe
• Power cord kit (Part Number PM3X215)
Disposer
• Hammer