Table of Contents
Advertisement
Quick Links
Content
1
Important Safety Instructions...................................................................3
2
Conformity ............................................................................................. 11
Mounting - dismantling ......................................................................... 12
3
Stand mounting ................................................................................................ 12
4
Front and Rear Panel Illustration ........................................................... 14
The Device ...................................................................................................... 14
Connections ..................................................................................................... 15
4.3
CI/CI+ Slot .............................................................................................. 16
4.4
Remote Key Function ............................................................................. 18
4.5
Connecting to TV-Signal Input ................................................................ 21
4.5.1
Connection for DVB-T2 reception or cable TV ................................. 21
4.5.2
Connection for Satellite reception..................................................... 22
5
First Time Setup .................................................................................... 23
Basic Settings .................................................................................................. 23
Channel search ................................................................................................ 24
First Time Installation ....................................................................................... 26
BLUE key. ........................................................................................................ 26
Satellite Managment ........................................................................................ 27
Satellite settings ............................................................................................ 28
Transponder .................................................................................................. 28
Channel search ............................................................................................. 29
Program Edit .................................................................................................... 29
Signal information ............................................................................................ 30
CI information .................................................................................................. 30
6
OSD Settings (Main Operations) ........................................................... 33
6.1 CHANNEL MENU .................................................................................... 33
6.2
PICTURE MENU .................................................................................... 38
6.3 SOUND MENU .......................................................................................... 40
6.4
TIME MENU ........................................................................................... 41
6.5 SETUP MENU ........................................................................................... 43
6.6 LOCK MENU ........................................................................................... 45
7
Hotel Mode ............................................................................................ 47
8
EPG Menu (Electronic Program Guide). ............................................... 50
9
Troubleshooting .................................................................................... 51
No sound /No Picture ....................................................................................... 51
Error notes ....................................................................................................... 53
10 CI+ information ....................................................................................... 55
11 TELETEXT Function Keys ...................................................................... 57
12 Selecting the input source ....................................................................... 59
13 Connecting USB Devices ........................................................................ 60
13.1 Photo Playback ..................................................................................... 61
13.2 Music Playback ..................................................................................... 62
13.3 Video Playback ...................................................................................... 63
DYON ENTER 42 PRO X2
V 1.2.0
Advertisement
Table of Contents
Related Manuals for Dyon ENTER 42 PRO X2
Summary of Contents for Dyon ENTER 42 PRO X2
-
Page 1: Table Of Contents
DYON ENTER 42 PRO X2 V 1.2.0 Content Important Safety Instructions..............3 Conformity ..................... 11 Mounting – dismantling ................. 12 Stand mounting ....................12 Front and Rear Panel Illustration ............14 The Device ...................... 14 Connections ..................... 15 CI/CI+ Slot ....................16 Remote Key Function ................ - Page 2 DYON ENTER 42 PRO X2 14 Specifications ..................64 15 Glossary ....................66 16 Warranty condition ................67...
-
Page 3: Important Safety Instructions
DYON ENTER 42 PRO X2 Important Safety Instructions 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings, install in accordance with the instructions. - Page 4 DYON ENTER 42 PRO X2 13) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
- Page 5 DYON ENTER 42 PRO X2 The symbol indicates that dangerous voltages constituting a risk of electric shock are present within this unit. The symbol indicates that there are important operating and maintenance instructions in the literature accompanying this unit. The symbol indicates that this product incorporates double insulation between hazardous mains voltage and user accessible parts.
- Page 6 DYON ENTER 42 PRO X2 Caution Do not trap the power supply cord under the television receiver. Never stand on, lean on, or suddenly push the television or its stand. You should pay special attention to children. Serious injury may result if it should fall.
- Page 7 DYON ENTER 42 PRO X2 Tips regarding environmental protection At the end of its operating life, this product may not be disposed of by way of your normal household waste. Instead it must be delivered to a collection point for recycling electrical and electronic equipment.
- Page 8 DYON ENTER 42 PRO X2 Support URL: http://www.dyon.eu See our website for the latest information on this engine, on other products by our company and on our company itself. If you have questions or problems, please read the FAQs on our website or contact our customer support service support@axdia.de...
- Page 9 DYON ENTER 42 PRO X2 Appropriate use The device is designed for receiving and watching encrypted and unencrypted DVB-T2, DVB-S2 and DVB-C TV channels (free-to-air) for private use. It is exclusively meant for this purpose and must only be used for the same. This also includes paying attention to all information contained in this operating manual, especially in the safety instructions.
- Page 10 DYON ENTER 42 PRO X2 Caution The device turns off after 2 hours without pressing any key. Please note that this is NOT a defect. The device is designed like this. Please use the system settings to turn off this function if necessary.
-
Page 11: Conformity
DYON ENTER 42 PRO X2 Conformity We, Axdia International GmbH, hereby declare that this device corresponds to the basic requirements and relevant regulations outlined in guidelines 2014/53/EU and 2009/125/EC. The CE declaration of conformity for this product may be found on the following link: www.dyon.eu... -
Page 12: Mounting - Dismantling
DYON ENTER 42 PRO X2 Mounting – dismantling Stand mounting Fix the feet in the device as described in the picture and fix them with the enclosed mounting screws... - Page 13 DYON ENTER 42 PRO X2 Wall mounting Fasten your wall bracket to the threads on the back and observe the whole spacing. 200mm 100mm...
-
Page 14: Front And Rear Panel Illustration
DYON ENTER 42 PRO X2 Front and Rear Panel Illustration The Device Remote Sensor and Status indicator In stand-by mode, the status indicator lights up red. Turn the TV on or off... -
Page 15: Connections
DYON ENTER 42 PRO X2 Connections Connections from bottom to top: 1. SCART 7. DVB-S 2. HDMI 1 (ARC) 8. DVB-C/-T 3. HDMI 2 9. CI-Module 4. VGA 10. Mini AV/PC Audio 5. USB 11. Headphones 6. Digital Audio Out... -
Page 16: Ci/Ci+ Slot
DYON ENTER 42 PRO X2 4.3 CI/CI+ Slot Note: According the CI Slot: Please take care to insert the CI-Module (CAM) in the correct way. The Top side of the module must face against the wall behind. This device is equipped with a CI+ slot for use with cam modules and smart cards which allow for the viewing of encrypted Pay-TV channels. - Page 17 DYON ENTER 42 PRO X2 Notice Module and smart card are not including in the packaging. Install the CI+ module after the channel scan has been accomplished and all other settings have been set. The activation of the card may take several minutes for the first time it is used.
-
Page 18: Remote Key Function
DYON ENTER 42 PRO X2 Remote Key Function POWER: To switch the set device to on or standby. MUTE: To disable or enable the sound output. PMODE: Change image setting. AUDIO: To change the audio track. SMODE: To change the sound setting. - Page 19 DYON ENTER 42 PRO X2 23. FAV: Used to access your favorite channels. 24. CH+/-: Channel selection. 25. VOL+/-: Adjust the volume level. 26. EPG: To display information about the program being viewed and what’s on next. (Not for ATV) (Only in USB mode): Play / Pause 28.
- Page 20 DYON ENTER 42 PRO X2 Notes on batteries If the remote control is not used for a long period of time, please remove the battery from the compartment. Do not heat batteries or dispose of them in fires. Do not dismantle, deform or modify batteries.
-
Page 21: Connecting To Tv-Signal Input
DYON ENTER 42 PRO X2 Connecting to TV-Signal Input 4.5.1 Connection for DVB-T2 reception or cable TV Connect the TV signal cable (the antenna cable, for example) to the Antenna Input Jack (RF) on the back of the unit. After connection, switch on the device. Perform the initial installation or press SOURCE, select DVB-T/C and perform the station search. -
Page 22: Connection For Satellite Reception
DYON ENTER 42 PRO X2 4.5.2 Connection for Satellite reception Connect the signal cable to the LNB IN input on the rear panel. After connection, switch on the device. Perform the initial installation or press SOURCE, select SATELLITE and perform the station search. Please note the reception path... -
Page 23: First Time Setup
DYON ENTER 42 PRO X2 First Time Setup Note Before you proceed, please make sure that the receiver/antenna cable is connected. Basic Settings 1. This screen is only displayed when the TV is turned on for the first time or reset to the factory default setting. -
Page 24: Channel Search
DYON ENTER 42 PRO X2 Channel search Note If you receive television for private use, DTV is usually the right choice for the type of reception. Then select the reception mode available to you. Other settings are usually not necessary. - Page 25 DYON ENTER 42 PRO X2 Digital Type Then select the reception path depending on how TV channels are received by you. DVB-C Cable Television If you want to watch cable television, please select the DVB-C option for RECEPTION WAY using the arrow keys.
-
Page 26: First Time Installation
DYON ENTER 42 PRO X2 Satellite First Time Installation If you select Satellite Mode in the Tune Type and you will see the following picture. If you want load the default channel list, please press EXIT key. if you want to search the channel please press the... -
Page 27: Satellite Managment
DYON ENTER 42 PRO X2 Satellite Managment Configure the settings of satellites and confirm with OK. Satellites' list: Press / to select a satellite, whose settings will be shown at right side. LNB Type Press //OK to show the list of LNB Types which is shown as frequencies of local oscillator. -
Page 28: Satellite Settings
DYON ENTER 42 PRO X2 Satellite settings Add satellites: Press RED to add a new satellite, in which you must input an unique longitude, and edit the satellite's name with soft keyboard. Edit satellites: Press GREEN to edit the focused satellite. -
Page 29: Channel Search
DYON ENTER 42 PRO X2 BLUE to pop the menu of scanning setting. After Configuring the settings, press OK to start multi-transponder scanning. Channel search Single Satellite Scan: Press BLUE to pop the menu of scanning settings. Scan Mode: Press / to select default, which scans the default transponders built in and NetWork, which scan with NIT on. -
Page 30: Signal Information
DYON ENTER 42 PRO X2 Rename a TV or Radio Program Select the program and press GREEN button to rename the channel.(only ATV) You can type it on screen keyboard. Move a TV or Radio Program Select the preferred program then press the YELLOW button. - Page 31 DYON ENTER 42 PRO X2 If a Module is set in some more options are available at the CI Information page of the OSD. 1. Press the menu key to open the system settings. 2. Us the arrow keys to select CI Information and press OK to open the settings.
- Page 32 DYON ENTER 42 PRO X2 First aid! No transmitter is displayed after the first installation. Check that the antenna cable is correctly connected to both the junction box and the device. Make sure that both the correct reception mode and the correct reception path have been selected.
-
Page 33: Osd Settings (Main Operations)
DYON ENTER 42 PRO X2 6 OSD Settings (Main Operations) Press the MENU button and / to select the page. Press / to select the setting. CHANNEL MENU NOTE: After the initial installation, only stations of the currently selected receiver source can be edited here. - Page 34 DYON ENTER 42 PRO X2 1) Auto Tuning: Press the MENU button and 2 x the OK button. Press the button ◄► ▲▼, to select a country. Then push the OK button, to start the auto tuning. NOTE: All stored channels will be erased and overwritten during automatic channel search.
- Page 35 DYON ENTER 42 PRO X2 2) DTV Manual Tuning: You can select a DTV channel and then search the channels in this channel. To select a channel. please press / Then press OK to search the channel. NOTE: Bad (bad) - Normal (normal) - Good (good) is the signal strength.
- Page 36 DYON ENTER 42 PRO X2 3) Programme Edit: You can delete, move, skip, or add channels to your favorites. First, change to the reception mode DVB-T/C or Satellite, in which you want to edit the channel list and sort channels.
- Page 37 DYON ENTER 42 PRO X2 Red Button Press the red videotext button. The selected program will be deleted. Delete Yellow Button Press the yellow button, then use the Move /button to move the selected channel. Press the yellow button again to save the setting.
-
Page 38: Picture Menu
DYON ENTER 42 PRO X2 6.2 PICTURE MENU The second item of the MENU is PICTURE MENU. You can adjust picture effect here, such as contrast, brightness, etc. (just if in picture mode personal has been selected) Press ▲▼ to select the setting, press ◄► to change the... - Page 39 DYON ENTER 42 PRO X2 Description of the individual menu items: Picture Mode Vivid, Standard, Soft, User Contrast Setting 0 - 100 Brightness Setting 0 - 100 Colour Setting 0 - 100 Tint Setting 0 - 100 Sharpness Setting 0 - 100...
-
Page 40: Sound Menu
DYON ENTER 42 PRO X2 The HDMI mode setting is only available when HDMI is selected as the input source and a device is connected. 6.3 SOUND MENU The third item of the MENU is the SOUND MENU. You can adjust the sound effect here such as treble, bass, balance etc. -
Page 41: Time Menu
DYON ENTER 42 PRO X2 SPDF Mode PCM / Auto AD Switch On / Off 6.4 TIME MENU The fourth menu item is the TIME menu. You can set the sleep timer, the auto standby, and the display time. Press ▲... - Page 42 DYON ENTER 42 PRO X2 Description of the individual menu items: Clock Automatically by time zone Off Time Set Time when the TV should turn off On Time Set Time when the TV should turn on Time Zone Set Time Zone GMT+1...
-
Page 43: Setup Menu
DYON ENTER 42 PRO X2 6.5 SETUP MENU The fifth item of the MENU is the SETUP MENU. You can adjust the Menu language, Audio language, Subtitle language etc. Press ▲▼ to select the setting, press ▲▼ to select the value to change, press ◄►... - Page 44 DYON ENTER 42 PRO X2 Language Select the menu language Audio Languages Select Audio Language Subtitle Language Select Subtitle Language Country Select the country in which the device is being used Restore Factory Reset to the factory setting (all data...
-
Page 45: Lock Menu
DYON ENTER 42 PRO X2 LOCK MENU The sixth item of the menu is the LOCK MENU You can lock system, set password, lock channel and set parental guidance. Once you set the lock system on you can not search the channels or change any channels. - Page 46 DYON ENTER 42 PRO X2 Note: The default password is 0000. If the menu is completely locked, the hotel mode can be opened directly with the key combination MENU - 4 - 5 - 8 - 8 (without hyphens). Lock station: Press ▲ ▼ to select a program (station), press the green teletext key to lock the program.
-
Page 47: Hotel Mode
DYON ENTER 42 PRO X2 7 Hotel Mode Note on operation in hotel mode: To enter the hotel mode, press the number combination “4588” while in the MENU. Now this menu item is activated, press ◄► to change the setting (On / Off) and you can select "Hotel mode", confirm with OK. - Page 48 DYON ENTER 42 PRO X2 Hotel Mode: Set Hotel mode on/off. Maximum Volume: Set max volume limitted. This option allows you to set the Max Volume Level. Volume Default: Power on default volume, press the ◄ or ► button to select the desired volume.
- Page 49 DYON ENTER 42 PRO X2 Time Lock: Set Time Lock on/off. Option Lock: Set Option Lock on/off. Lock Lock: Set Lock Lock on/off. Source Lock: Source lock, you can't change the source, when set to “off”. Input Mode Start: Satellite,DVB-T/T2,DVB- C/ATV/SCART/PC/HDMI1/HDMI2/AV/USB, press the ◄...
-
Page 50: Epg Menu (Electronic Program Guide)
DYON ENTER 42 PRO X2 EPG Menu (Electronic Program Guide). The EPG menu is used to look at what is being broadcasted on DTV or Radio channel in the day. To access the EPG menu, press the EPG button. Press / to select the program of the /... -
Page 51: Troubleshooting
DYON ENTER 42 PRO X2 Troubleshooting No sound /No Picture Trouble phenomenon Symptom Inspection Check Picture Audio antenna position, direction Snow Noise or connection antenna position, direction or connection Ghost Normal audio electronic equipment,car/ Interfere Noise motorcycle,fluorescent light Volume (check if mute is... - Page 52 DYON ENTER 42 PRO X2 Problem Potential What to do Reasons Remote control The battery is Change new unit does not empty battery work Remote control Adjust the way of unit is not holding remote in the right site control unit and...
-
Page 53: Error Notes
DYON ENTER 42 PRO X2 Error notes Display Possible cause Solutions - If no module is used and you do not want to An encrypted use a module, please transmitter is No CI change the transmitter. displayed, but the CI... - Page 54 DYON ENTER 42 PRO X2 NOTE: In some cases, in the event of a malfunction, the TV should simply be reset to the factory setting (in the SETUP MENU). NOTE: If the display shows the USB mode or the options "PHOTO", "MUSIC"...
-
Page 55: Ci+ Information
DYON ENTER 42 PRO X2 10 CI+ information The TV set contains a Common Interface CI+ Slot. Different CAM cards with smart card reader can be found at local dealers for different Pay-TV provider. • Set in: Turn off the TV. Now insert the module. - Page 56 DYON ENTER 42 PRO X2 Important: Menu options and existing setting points depend on the CI+ module you are using. The CI+ module (not included in the scope of delivery) is necessary to be able to receive encrypted stations using a smart card (not supplied).
-
Page 57: Teletext Function Keys
DYON ENTER 42 PRO X2 11 TELETEXT Function Keys Teletext is an information system broadcast by certain channels which can be consulted like a newspaper. It also offers access to subtitles for viewers with hearing problems or who are not familiar with the transmission language (cable networks, satellite channels, etc.) - Page 58 DYON ENTER 42 PRO X2 DIRECT Coloured are as are displayed at the bottom of ACCESS TO the screen. The 4 coloured keys are used to THE ITEMS access the items or corresponding pages. The coloured areas flash when the item or the page is not yet available.
-
Page 59: Selecting The Input Source
DYON ENTER 42 PRO X2 Selecting the input source This unit includes a variety of input sources, which can be selected and selected using the SOURCE button on the TV or on the remote control. Press SOURCE to enter the input source menu, the following screen appears: Navigation buttons ▲... -
Page 60: Connecting Usb Devices
DYON ENTER 42 PRO X2 13 Connecting USB Devices The Dyon Core has an USB Port to upgrade the software and playing media files. If possible, please connect USB devices directly to the Devices USB interface. If this is not possible, use only USB extension cables not exceeding 25 cm. -
Page 61: Photo Playback
DYON ENTER 42 PRO X2 13.1 Photo Playback Use ◄► or ▲ ▼ to select a photo. A preview image is displayed. Press the OK button or Play button ► (at the bottom of the remote control) to display the photo in full screen mode. -
Page 62: Music Playback
DYON ENTER 42 PRO X2 13.2 Music Playback Use ◄► or ▲ ▼ to select a music file. An infofile is displayed. Press the OK button or Play button ► (at the bottom of the remote control) to play the music file... -
Page 63: Video Playback
DYON ENTER 42 PRO X2 13.3 Video Playback Use ◄► or ▲ ▼ to select a photo. A preview image is displayed. Press the OK button or Play button ► (at the bottom of the remote control) to display the movie in full screen mode. - Page 64 DYON ENTER 42 PRO X2 14 Specifications Item Specification ATV/DTV Tune Frequency Range VHF: 174MHz to 230 MHz UHF: 470MHz to 862 MHz Connections RF IN IEC 169-2 female connector Composite Video, Audio L/R Power Input 100-240V ~ 50/60Hz Consumption 76 W.
- Page 65 DYON ENTER 42 PRO X2 Product information about the energy efficiency of this device according to EU Regulation (EU) 2019/2013 can be found from the date of validity, 01.03.2021 on the following website of the European Union. Please scan the following QR Code, for example with your cell phone, to open the page.
- Page 66 DYON ENTER 42 PRO X2 15 Glossary DiSEqC Digital Satellite Equipment Control Digital system, with which the receiver can control different components of the external unit. It is especially used for selecting from multiple satellite positions (for example Astra and Eutelsat).
- Page 67 We offer a warranty on our products in accordance with the following conditions: 1. DYON products are covered by a 12 month warranty. We will resolve damages or defects on DYON products free of charge within 12 months of the purchase date under the following warranty conditions.
- Page 68 DYON ENTER 42 PRO X2 IMPORTANT: AXDIA will only accept parcels that have an RMA number. Please observe the following when sending the product: 1. Send the product suitably packaged with carriage and insurance paid. Do not enclose any accessories with the products (no cables, CD's, memory cards, manuals, etc.), unless the AXDIA Service Centre specifies otherwise.
Need help?
Do you have a question about the ENTER 42 PRO X2 and is the answer not in the manual?
Questions and answers