Table of Contents
Advertisement
Telephone Helpline: 0845 146 2887
Cleaning, Care & Maintenance
Disconnect from the power supply and allow the appliance to cool before
cleaning.
•
Use warm, soapy water and a damp cloth to clean the appliance.
•
DO NOT use abrasive cleaners or pads.
•
Dry thoroughly after cleaning.
Troubleshooting
A qualified technician should carry out repairs if required.
Fault
The unit is not working
"E1" on Display
"E2" on Display
"E3" on Display
Technical Specifications
Model
Voltage
220-240V~
FD059
50-60Hz
FD059_EN_A5_v1_20220517.indb 5
FD059_EN_A5_v1_20220517.indb 5
Probable Cause
The unit is not switched on
Plug or lead is damaged
Fuse in the plug has blown
Mains power supply fault
Unsuitable cookware
Appliance has overheated
Temperature sensor is
damaged
Input voltage is too high/
low
Power
Current
(Max.)
1000W
4.35A
Solution
Check the unit is plugged in correctly and
switched on
Replace plug or lead
Replace the fuse
Check mains power supply
Replace with suitable cookware
Check ventilation slots for blockage. Allow to
cool before attempting to use again.
Replace temperature sensor
Make sure the mains power supply is suitable
for the appliance.
Power
Dimensions
lever
Ø x H (mm)
1 - 10
245 x 68
EN
Weight
1.7kg
5
2022/5/17 13:26
2022/5/17 13:26
Advertisement
Table of Contents
