Page 1
BALDERTECH BALDER Use and Transport Balder www.baldertech.com...
Page 2
This must be done on a level surface and the chair must be turned off. Batteries We confirm that Balder electric wheelchairs are supplied from the factory with batteries. These are approved in accordance with International Air Transport Association (IATA): Packing Instruction 872, Special Provision A67.
Page 3
If a situation should arise, however, when it is necessary to physically disconnect the power supply from the battery terminals, it is done like this: Drive the chair into the required position for transportation. 2. Turn off the chair. 3. Remove the locking pin so that the seat can be lifted. ( See sketch) 4.
Page 4
EQUIPMENT THAT HAS CONTACT. THERE BEEN MOUNTED ON MUST BE FULL BODY THE CHAIR. CONTACT WITH THE 3-POINT STRAP. These guidelines cover Balder wheelchairs with standard equipment. Baldertech AS Email : info@baldertech.com Telephone : +47 32 11 11 00 www.baldertech.com...