Thermostat; Spinning Speed Variator - AEG 40809 User Instructions

User's instructions
- RINSE HOLD
You can use this button with any program. The water used in the last rinse
is not drained at the end of the selected program so that the washing will not
become creased if you do not take it out of the drum immediately that the
washing machine stops.
Select the DRAIN program when you want to drain the water.
Release the RINSE HOLD button to spin.
Progress within the program
The programmer turns gradually and shows you how far the program has
advanced.

Thermostat

Use the thermostat to choose the temperature of the
washing water. You can choose any temperature between
cold (" ") and 95°C.
The temperatures given in the programs table (page 24)
are provided as a guide. You can vary them using the
thermostat knob on your washing machine. Always scru-
pulously respect the temperature shown on the label on
each item of washing.
Spinning speed selector
It enables to choose the spinning speed until 800 rpm
on cotton programmes and until 650 rpm on synthetics
programmes.
The position " " corresponds to a spinning suppres-
sion (only a draining). Choose the spinning speed
according to the nature of the laundry and the humidity
degree wished at the end of the cycle.
Laundry
Cotton
Synthetics
12
Spinning speeds
300 400 500 600 700 750 800
300 350 400 450 550 600 650