GE GFSS2HCYSS Owner's Manual And Installation Instructions page 25

INSTALL BOTTOM HINGE AND
5
LEVELING LEG
Using a 1/2" socket ratchet/driver, install the
A
hinge pin and nut in the opposite hole on the
hinge bracket with leveling leg.
Using a 5/16" socket ratchet/driver, install the
B
hinge bracket with leveling leg on the left side
of the refrigerator. The pin will be toward the
outside of the refrigerator.
Using a 5/16" socket ratchet/driver, install the
C
leveling leg bracket on the right side of the
refrigerator.
Installation Instructions
25
TRANSFER REFRIGERATOR AND
6
FREEZER DOOR STOPS
A Remove the door stop on the right side of the
bottom of the door by removing the two screws.
B Move the plastic hinge hole thimble to the
opposite hole.
Install the door stop on the left side, making
C
sure to line up the screw holes in the door stop
with the holes in the bottom of the door.
A
Bottom of Door (Right Side)
TRANSFER REFRIGERATOR
7
DOOR HANDLE TO RIGHT
Refer to Remove the Fresh Food Door Handle
and Attach the Fresh Food Door Handle
sections for instructions.
REHANG FREEZER DOOR
8
Lower the freezer door onto the bottom hinge pin.
A
Ensure that the plastic hinge pin thimble is on the
hinge pin or inside the door hinge pin hole located
in the bottom of the door.
B Straighten the door and line it up with the
center hinge bracket.
Install the center hinge pin with a 3/4" socket
C
ratchet/driver. Turn it until it extends through
the hinge bracket and into the freezer door.
Bottom of Door (Left Side)