GE GFSS2HCYSS Owner's Manual And Installation Instructions page 18

INSTALLING THE REFRIGERATOR
REMOVE THE FRESH FOOD
6
DOOR HANDLE
(For placement in the installation location
or reversal of the handles – on some
models)
Stainless steel (on
some models):
REMOVING
A
THE DOOR
HANDLE: Loosen
the set screws
with the 3/32"
Allen wrench
and remove
the handle.
NOTE: For
Double Door
models follow
the same
procedure on
the opposite door.
Plastic handle
(on some models):
A REMOVING THE DOOR HANDLE: Depress the
tab on the underside of the handle and slide
the handle up and off of the mounting
fasteners.
REVERSING THE
DOOR HANDLE
(on some
models):
• Remove
the handle
mounting
fasteners with
a 3/16" Allen
wrench and
transfer
the handle
mounting
fasteners to
the right side.
• Remove the logo badge.
• Remove and transfer the plug button to
the left side of the fresh food door. NOTE:
Use a flat plastic edge to prevent
damaging the door. Remove any adhesive
on the door with a mild detergent. Remove
the paper covering on the adhesive
backing on the logo badge prior to carefully
attaching the badge to the door.
Installation Instructions
A
B
Mounting
Fasteners
(appearance may vary)
B
A
Mounting
Fasteners
(appearance may vary)
(cont.)
REMOVE THE FREEZER DOOR HANDLE
7
Stainless steel and plastic handles:
Loosen the set screws located on the
A
underside of the handle with the 1/8" Allen
wrench and remove the handle.
NOTE: If the handle mounting fasteners need
to be tightened or removed, use a 3/16" Allen
wrench.
Badge
Badge
18
A