BMW X5 xDrive45e PLUG-IN HYBRID 2022 Owner's Manual page 298

CONTROLS
Button Function
Air flow, manual.
Intensity AUTO program.
Air distribution, manual.
Seat heating, refer to page 136.
Switching climate control functions
on/off
Functional requirement
The rear automatic climate control is not ready
for operation if the automatic climate control is
switched off or if the function for defrosting the
windows and removing condensation is active.
Switching on/off using iDrive
1. "CAR"
2. "Settings"
3. "Climate control"
4. "Heating/ventilation"
5. "Second row of seats"
6. "Activate heating/cooling"
Switching on using the button
Press one of the following buttons:
▷ Temperature.
▷ Maximum cooling.
▷ AUTO program.
▷ Upper side of the air flow, manual button.
▷ Air distribution, manual.
Switching off using the button
Press and hold the bottom of the but-
ton.
298
Climate control
Online Edition for Part no. 01405A604A9 - VI/22
Temperature
Principle
The automatic climate control cools or heats
to the configured temperature and then keeps
the temperature constant.
Setting the temperature
Using the button:
Press the upper or lower button side
to set the desired temperature.
Via iDrive:
1. "CAR"
2. "Settings"
3. "Climate control"
4. "Heating/ventilation"
5. "Second row of seats"
6. "Temp. left:" or "Temp. right:"
7. Set the desired temperature.
The selected temperature is shown on the cli-
mate control display.
Do not rapidly switch between different tem-
perature settings. Otherwise, the automatic cli-
mate control will not have sufficient time to ad-
just the set temperature.
Maximum cooling
Principle
The system is set to the lowest temperature,
optimum air flow and recirculated-air mode
with the drive-ready or standby state switched
on.
Functional requirement
The function is available with outside tempera-
tures above approx. 32 ℉/0 ℃ and with the
drive-ready or standby state switched on.