Table of Contents
Advertisement
Quick Links
P.N.52166.A_EN
09/2020
Use and Maintenance Manual for
winch with 8000 kg (17637 lbs)
capacity.
- W 8 -
-- TRANSLATION OF THE ORIGINAL INSTRUCTIONS --
Drafted in accordance with the essential requirement of health and safety 1.7.4 of Annex I to Directive 2006/42/CE
Magni Telescopic Handlers Srl
Via Magellano, 22 - 41013 Castelfranco Emilia (MO) - ITALY
Tel. +39 059 8031000 • Fax +39 059 8638012 • P. IVA/C.F IT03353620366
Capitale Sociale 1.262.500 Euro i.v.
• SDI: XMXAUP4 •
www.magnith.com
Advertisement
Table of Contents
Related Manuals for Magni W 8
Summary of Contents for Magni W 8
- Page 1 Use and Maintenance Manual for winch with 8000 kg (17637 lbs) capacity. - W 8 - -- TRANSLATION OF THE ORIGINAL INSTRUCTIONS -- Drafted in accordance with the essential requirement of health and safety 1.7.4 of Annex I to Directive 2006/42/CE...
- Page 2 Revision no. Date Notes 07/2019 First edition 09/2020 Added model W8 U 3L - p.n.52943...
-
Page 3: Table Of Contents
INDEX MAINTENANCE PREFACE General instructions for maintenance of the General information ........4 winch ............32 Information regarding safety ......5 Notes regarding safety .......32 Correct use of the equipment ..... 5 Washing and cleaning ........32 Improper use of the equipment ....5 Preliminary checking of the winch before use Assistance ............ -
Page 4: General Information
PREFACE Some parts of the text that are considerably important or certain important specifications have been highlighted with the use of certain symbols, the meanings of which are explained below: General information Rosso — used to indicate the presence of an imminently dangerous situation This Manual has been prepared by the Manufacturer which, if not avoided, can cause with the intention of providing the operators with the... -
Page 5: Information Regarding Safety
Information regarding safety Improper use of the equipment Correct use of the equipment The manufacturer declines all responsibilities in the following cases: The manufacturer demands compliance with the • if the product is not used correctly in compliance following requirements: with the national legislation and/or regulations regarding workplace safety;... -
Page 6: Identification Elements
IDENTIFICATION ELEMENTS Identification plate Magni T.H. equipment is designed to provide the Customer high level of simplicity of use and maintenance. However, before use, the operator must carefully read and gain complete familiarity with the methods of application and use of it and all the aspects concerning safe use as described in this Use and Maintenance Manual. -
Page 7: Position Of The Safety, Functional And Generic Stickers
Position of the safety, functional and generic stickers IDENTIFICATION ELEMENTS... - Page 8 Ref. Code Description Pictogram 08163 CE plate 03441 Sticker indicating a danger of crushing hands 04098 Sticker indicating the levelling point 01377 Sticker indicating the horizontal levelling point 18259 Sticker indicating the anchor point 26739 Warning sticker (with yellow diagonal stripes) for the block 03439 Sticker indicating the greasing point 46538...
-
Page 9: Ec Declaration Of Conformity
EC declaration of conformity IDENTIFICATION ELEMENTS... -
Page 10: Instructions For Use And Warnings
INSTRUCTIONS FOR USE User obligations AND WARNINGS Read the Use and Maintenance Manual carefully; Before using the equipment, ensure its compatibility Introduction with the forklift truck with which it is to be used; Become acquainted with the operating area: quality of the road surface, obstacles on the ground or high up;... -
Page 11: How To Hook The Equipment
• connect the electrical system of the equipment to the connectors on the head of the vehicle’s telescopic boom [when present]. Vehicles produced by Magni T.H. are equipped with identification software that recognises the equipment connected and which enables movements and specific safety systems according to the type of equipment connected. - Page 12 If there is no obvious damage, please contact the Magni Telescopic Handlers Assistance Service. If the RED button is pressed, for safety...
-
Page 13: Conditions For Using The Equipment In Case Of Wind
Conditions for using the equipment in case of wind The equipment can also be used if wind is present, provided it does not exceed Grade 6 of the Beaufort Scale (speed 45 km/h; 28 mi/h; 12.5 m/s); For visual identification of this speed, refer to the Beaufort Scale below for empiric evaluation of the wind speed. BEAUFORT WIND SCALE speed speed... -
Page 14: Management Of The Controls
Management of the controls The equipment, like the entire vehicle, can only be operated if the following conditions are met: • operator sitting correctly in the driver’s seat, • pressing the movement enable button (DEAD MAN’S SWITCH) behind each joystick. If one or both of the aforementioned conditions is not present, all the commands imparted are inhibited and this fault is signalled by means of a flashing light on... -
Page 15: Description Of The Controls From The Radio Control
Description of the controls from the Batteries radio control In the centre of the radio control under the emergency button are the LEDs for checking operation of the radio control and the charging state of the batteries. 13. green LED: •... -
Page 16: How To Connect The Radio Control
How to connect the radio control To activate the radio control, proceed as follows: If connection between the radio control and the • start the vehicle and confirm the accessory on the forklift truck has been interrupted by the red multiple function display in the cab by pressing the emergency button being pressed (for the vehicle or green button;...