Cool Compact Vintos User Manual
  1. Manuals
  2. Brands
  3. Cool Compact Manuals
  4. Chiller
  5. Vintos
  6. User manual

Cool Compact Vintos User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
EN
User Manual
Cool Compact Blast Chiller / Blast Freezer
Vintos / Vintos+
4x GN 1/1 | 8x GN 1/1 | 10x GN 1/1 | 13x GN 1/1
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Vintos and is the answer not in the manual?

Questions and answers

Related Manuals for Cool Compact Vintos

Summary of Contents for Cool Compact Vintos

  • Page 1 User Manual Cool Compact Blast Chiller / Blast Freezer Vintos / Vintos+ 4x GN 1/1 | 8x GN 1/1 | 10x GN 1/1 | 13x GN 1/1...

  • Page 2: Table Of Contents

    Smart level control cycle – Vintos and Vintos+ 7.13 34-36 Manual cycle – Vintos and Vintos+ 7.14 37-39 Duplicate programmes / create own programmes – Vintos and Vintos+ 7.15 39-42 Edit own programmes – Vintos and Vintos+ 7.16 42-43 7.17 Move programmes in the product selection 7.18...
  • Page 3 TABLE OF CONTENTS Page 7.23 HACCP data export via USB stick 51-53 Maintenance 54-55 Safety Cleaning Care Extraordinary maintenance Warranty and customer service Disposal and recycling Wiring diagrams 56-61 EU – Declaration of Conformity...

  • Page 4: Preliminary Remark

    1. PRELIMINARY REMARK Congratulations on the purchase of your new Cool Compact blast chiller / blast freezer. All our appliances are subject to constant quality control and are designed for their use in commercial kitchens. Before using the appliance, please read the user manual carefully and pay particular attention to adhering to all safety precautions to ensure the highest performance capabilities and maximum safety when using the appliance.
  • Page 5 4. SAFETY REGULATIONS In designing and manufacturing the blast chillers / blast freezers, emphasis has always been placed on maintaining the safety and integrity of the user. • To prevent any accidental contact with live parts, guards with metal covers have been fitted. These guards may only be removed with the aid of tools by qualified personnel.

  • Page 6: Transport And Handling

    The manufacturer rejects all responsibility in the event of improper use of the product. The manufacturer also reserves the right to make any modifications to its products that deems to be necessary or useful, without affecting the basic characteristics. 6. INSTALLATION The installation, commissioning and maintenance of the blast chillers is only to be carried out by refrigeration technicians and / or technically qualified personnel or personnel approved by the manufacturer.

  • Page 7: Electrical Connection

    • Peel off the protective PVC film from all sides. • Remove the plastic protection from the core temperature probe. • Place the appliance horizontally in a well-ventilated location. • Avoid locations directly next to a heat source or in direct sunlight. •...

  • Page 8: Connection Of An External Unit

    • Make sure the electrical cable is intact and have it replaced by qualified personnel if it is damaged. • The electrical supply line must be compatible to the power rating of the appliance (refer to the rating plate label). •...

  • Page 9: Setting Up

    6.4.1. SETTING UP After unpacking the condensing unit, follow the instructions for a proper installation: • Set up the unit straight and on a solid surface. • The refrigeration unit is suitable for an indoor and outdoor installation. • For an outdoor installation, appropriate weatherproof housing must be provided. •...

  • Page 10: Control

    7. CONTROL 7.1 OVERVIEW: BASIC FUNCTIONS VINTOS Start screen chill Start screen freeze Start screen controller Start screen basic settings Page 2 start screen controller Page 2 basic settings...

  • Page 11: Overview: Basic Functions Vintos

    7.2 OVERVIEW: BASIC FUNCTIONS VINTOS+ Start screen chill Start screen thaw Start screen slow speed cooking Start screen controller Start screen basic settings Page 2 basic settings Page 2 start screen controller Start screen freeze Start screen combi Start screen prove...

  • Page 12: Initial Start-Up Of The Controller

    7.3 INITIAL START-UP OF THE CONTROLLER Check the following before initiating: • The plug and socket must correspond to the power ratings on the rating plate label. • The fuses in the fuse box must correspond to the rating specifications on the rating plate label. •...

  • Page 13: Blast Chilling Cycle - Vintos And Vintos

    7.4 BLAST CHILLING CYCLE – VINTOS and VINTOS+ Start screen Press "chill" key Pop-up: preparing machine: cooling? Explanation of key commands: "OFF/No" key Press to return to the start screen "Pull down" key Unit pre-cools to -15C "Run" key Unit immediately starts the blast chilling cycle "Pull down"...
  • Page 14 Pop-up: HACCP On this pop-up mask, enter the employee (author), the product and the weight of the product to be chilled. Press the "OK" key. Place the product to be chilled inside the unit and place the core probe in the product. Close the door.
  • Page 15 In each of these cycle steps, the following individual changes can be made for the current cycle. time fan speed air temperature core temperature Pop-up: air setpoint By pressing the air setpoint key for example, the corresponding window pops up and you can enter the desired value.

  • Page 16: Blast Freezing Cycle - Vintos And Vintos

    7.5 BLAST FREEZING CYCLE – VINTOS and VINTOS+ Start screen Press the “freeze” key on the start screen. Pop-up: preparing machine: cooling? Explanation of key commands: "OFF / No" key Press to return to the start screen "Pull down" key Unit pre-cools to - 30C...
  • Page 17 Pop-up: HACCP recording Fill in the input mask: employee (Author) product weight Confirm with the "OK" key. Place the product in the unit, place the core probe in the product. The corresponding cycle interface appears on the display. Cycle interface: freeze Center, large digits: calculated end time Small digits: date of end of cycle The displayed time may change repeatedly during...
  • Page 18 Cycle step: store frozen products In each step of this cycle, you can change or individually adapt the following for the current cycle by pressing the corresponding field: time fan speed air temperature core temperature (probe) Pop-up: air setpoint By pressing the "air setpoint" key for example, the "air setpoint"...

  • Page 19: Combined Cycle - Vintos

    7.6 COMBINED CYCLE – VINTOS+ Start screen Press the "combi" key. Pop-up: preparing unit: heating? "OFF/No" key Press to return to start screen "Heating" key Unit pre-heats to 60°C "Run" key Unit immediately starts the combined cycle Pop-up: preparing machine: heating The display indicates the air temperature.
  • Page 20 Product selection Use the arrow key on the bottom right to scroll through the product selection menu and choose the appropriate product by pressing the key. The pop-up for the HACCP recording appears. Pop-up: HACCP Fill in the input mask: employee (author) product weight...
  • Page 21 Cycle stages combined The dark blue line below the pot or the snowflake indicates which step of the cycle the controller is You can use the corresponding key to select which step of the cycle you want to view and / or change.

  • Page 22: Slow Speed Cooking Cycle - Vintos

    7.7 SLOW SPEED COOKING CYCLE – VINTOS+ Start screen Press "slow speed cooking" key. Pop-up: preparing machine: heating? "OFF/NO" Press to return to start screen "Heating" key Unit pre-heats to 60°C "Run" key Unit immediately runs the slow speed cooking cycle.
  • Page 23 Product selection menu Use the arrow key at the bottom right to scroll through the product selection menu and select the appropriate product by pressing corresponding key. The pop-up for HACCP recording appears. Pop-up: HACCP Fill in the input mask: employee (author) product weight...
  • Page 24 Cycle step: slow speed cooking The dark blue bar below the pot indicates which step of the cycle the controller is in. You can use the corresponding key to select which step of the cycle you want to view and / or change.

  • Page 25: Thaw Cycle - Vintos

    7.8 THAW CYCLE – VINTOS+ Start screen Press the "thaw" key. Product selections menu Select product and confirm the selection by pressing the corresponding key. The pop-up "ready at" appears on the display for entering as to when you need the product thawed.
  • Page 26 "Edit" key Pop-up to enter date and time appears. The desired end time can be set. Confirm entries with "OK". The HACCP input screen pops up. Cycle interface thaw Center, large digits: set end time Small digits: date of end of cycle The red bar below the date shows the time range of where the process is at.

  • Page 27: Prove Cycle - Vintos

    By pressing the "On/Off" key, the unit switches off. The finished product can be removed. The start screen appears on the display. 7.9 PROVE CYCLE – VINTOS+ Start screen Press the "prove" key. Product selection menu Select product and confirm the selection by pushing the corresponding key.
  • Page 28 Pop-up: ready at "Start" key The unit starts the process and finishes at the displayed time. Pop-up HACCP opens. Pop-up HACCP Fill out the input mask: employee (author) product weight Press the "OK" key to confirm. The display shows the cycle interface: prove. "Edit"...
  • Page 29 The red product key takes you to the set cycle steps. The dark blue line below the freeze / thaw symbol indicates which step of the cycle the controller is You can use the corresponding key to select which step of the cycle you want to view and / or change.

  • Page 30: Storage Cycle - Vintos

    7.10 STORAGE CYCLE – VINTOS+ Start screen Press the arrow keys on the bottom right to get to the second page of the start screen. storage defrost sterilization Start screen page 2 Press "storage" key. A selection menu opens up.
  • Page 31 Cycle interface "storage" Center: Large digits: set end time Small digits: date of end of cycle Please note! Storage cycles are limited to 24h at the most. The blue bar below the date shows the time range of where the process is at. The elapsed time is displayed below the bar.

  • Page 32: Defrost Cycle - Vintos And Vintos

    7.11 DEFROST CYCLE – VINTOS and VINTOS+ Start screen Press the arrow keys on the bottom right to get to the second page of the start screen. storage defrost sterilization Start screen page 2 Press "defrost" key. The cycle interface „"defrost" opens.

  • Page 33: Sterilization Cycle - Vintos

    7.12 STERILIZATION CYCLE – VINTOS+ Attention! Before starting the sterilization cycle, remove all food products from the unit and clean the interior thoroughly. (See chapter 8.2. Cleaning) Start screen Press the arrow keys on the bottom right to get to the second page of the start screen.

  • Page 34: Smart Level Control Cycle - Vintos And Vintos

    7.13 SMART LEVEL CYCLE – VINTOS and VINTOS+ The smart level control mode is available for blast chilling, blast freezing and slow speed cooking. In this mode, you have the option of setting different times and products for the respective inserted load.
  • Page 35 Product selection page 3 Press the "smart level control" function key. You get to the smart level control function interface which displays the number of insertion levels (slots) corresponding to your model unit. This key allows you to set the fan speed and the air temperature individually.
  • Page 36 Overview smart level control The selected levels (slots) are now highlighted in yellow and the product as well as the remaining time for each occupied level (slot) is being displayed. Once the time of one level (slot) has elapsed, a pop-up opens with a ready message for this level (slot).

  • Page 37: Manual Cycle - Vintos And Vintos

    7.14 MANUAL CYCLE – VINTOS and VINTOS+ Start screen Select cycle chill freeze thaw combi slow speed cooking prove Pop-up: preparing machine: cooling? "Off / No" key Return to the start screen "Pull down" key Unit pre-cools to -15°C "Start" key Unit immediately starts the blast chilling cycle Press "Pull down"...
  • Page 38 Product selection page 3 with "manual" Interface manual Light blue key Press chill or freeze key. Settings manual programme You can enter the following settings: time air temperature core temperature fan speed Confirm your entries by pressing the "OK" key. Press the „clock“...

  • Page 39: Duplicate Programmes / Create Own Programmes - Vintos And Vintos

    At the end of the cycle, the pop-up "end of cycle chill" appears. 7.15 DUPLICATE PROGRAMMES / WRITE OWN PROGRAMMES – VINTOS and VINTOS+ Start screen Select cycle chill freeze thaw combi slow speed cooking prove Pop-up: preparing machine: cooling? "OFF / NO"...
  • Page 40 Pop-up: edit / duplicate On a screen that pops up, you can edit the selected programme as follows: duplicate edit delete move position To write your own programme or to copy the programme press "duplicate". Pop-up: keyboard A window pops up where you can enter a new name for your programme.
  • Page 41 Window: programme steps Each step of the programme can be customized by pressing the upper light blue or red buttons with the cooling / freezing or heating symbol. One window at a time pops up in which the time air temperature evaporator fan speed core temperature can be set and applied to each respective...

  • Page 42: Edit Own Programmes - Vintos And Vintos

    Window: product selection page 3 In our example on page 3 "Schnitzel" programme. Your new programme can be started normally. Refer to Chapter 7.4 Blast Chilling Cycle 7.16 EDIT OWN PROGRAM – VINTOS and VINTOS+ Start screen Select cycle chill freeze thaw...
  • Page 43 Pop-up: edit / duplicate On a screen that pops up, you can edit the selected programme as follows: duplicate edit delete move position Press "edit" and the window with the corresponding programme steps pops up. Window: programme steps Each step of the programme can be customized individually by pressing the upper light blue or red buttons with the cooling/freezing or heating symbol.

  • Page 44: Move Programmes In The Product Selection

    7.17 MOVE PROGRAMMES IN THE PRODUCT SELECTION The programme you have created as well as all other programmes can be moved within the product selection interface so that the programmes you use the most appear on the first page. Window: product selection On the product selection menu, press the key of the programme you want to move for 5 seconds.

  • Page 45: Delete Programmes In The Product Selection

    7.18 DELETE PROGRAMMES IN THE PRODUCT SELECTION Window: product selection On the product selection menu, press the key of the programme you want to delete for 5 seconds. e.g. Schnitzel. Pop-up: delete position Press "delete" key. Another window pops up. Pop-up: delete recipe Delete recipe "Schnitzel"? Press the "OK"...

  • Page 46: Basic Settings Of The Controller

    7.19 BASIC SETTINGS OF THE CONTROLLER In the controller menu, all parameters of the control can be viewed and set. The access options are divided into four levels, each pending the access release by the customer or the manufacturer. Level I User level and accessible without password.
  • Page 47 Pop-up: login interface Press the password key. The graphic indicates the current level. Below are the fields: - login - new password - confirm password as well as logout and a back arrow Pop-up: password Press on login to get to another level. A pop-up will open where you can enter the corresponding password.

  • Page 48: Alarm Messages

    7.20 ALARM MESSAGES Window: start screen Press the menu key on the bottom left. A first menu page opens up. Window: menu page 1 on Level IV Press menu key alarms The window "alarm list" pops up. Window: alarm list Alarm list The alarms with start and end time are being displayed.

  • Page 49: View And Change Parameter List

    7.21 VIEW AND CHANGE PARAMETER LIST Window: start screen On the bottom left press the menu key. The first menu page opens up. Window: menu page 1 on level IV Open the parameter list on level IV. Request the password from our technical customer service.

  • Page 50: View And Change Relay

    7.22 VIEW AND CHANGE RELAY Window: start screen On the bottom left press the menu key. The first menu page opens. Window: menu page 1 on Level IV Using the arrow key go to menu page 2 Window: menu page 2 on level IV Press the TEST key.

  • Page 51: Haccp Data Export Via Usb Stick

    7.23 HACCP DATA EXPORT VIA USB STICK • Open the machine or installation compartment. • Insert the supplied USB stick into the USB port on the switch box. • The pop-up "Download haccp logs in the USB" appears on the display. •...
  • Page 52 • Download the files from the USB stick onto your PC and open the desired files in a spreadsheet programme (e.g. Excel). • Depending on the programme, it may be necessary to format the data. To do so, select the first column in Excel and choose the function: "Data / Texts in columns".
  • Page 53 • The HACCP data is then displayed in an Excel list with the following information: - serial number of the unit - model type - author - product - weight - recipe - date - time - air temperature - core temperature...

  • Page 54: Maintenance

    8. MAINTENANCE Please read the instructions in this section carefully. They contain basic rules for the maintenance of the blast chiller. 8.1. SAFETY For carrying out the cleaning, please note the instructions already given in point 3 and in particular the following safety instructions: •...

  • Page 55: Extraordinary Maintenance

    8.4. EXTRAORDINARY MAINTENANCE Any extraordinary maintenance may only be carried out by qualified personnel or by a technician or installer. The manufacturer denies any responsibility for work that has been performed on the device where the instructions in this operating manual have been disregarded. 9.

  • Page 56: Wiring Diagrams

    11. WIRING DIAGRAMS...

  • Page 64: Eu Declaration Of Conformity

    DIN 18872-5-2013-04 Blast chiller and blast freezer. Requirements and testing. If any unauthorized changes are made to the units, this declaration shall lose its validity. As of:08/2020 Cool Compact Kühlgeräte GmbH EN 220 305.online/135.02.2022 / Kö/BR...

This manual is also suitable for:

Vintos+4x gn 1/18x gn 1/110x gn 1/113x gn 1/1

Table of Contents