Storing The Exersaucer - Evenflo BABY ACTIVE exerSaucer Instructions Manual

Storing the ExerSaucer

1. Adjust legs to their lowest position.
To adjust height:
ALWAYS remove baby from ExerSaucer before adjusting.
Push button until the unit is in the lowest position. Make
N
sure that all three legs are adjusted to the lowest position.
2. Turn ExerSaucer upside down and remove optional mat if available.
Locate three (3) feet
pulling foot off leg. Repeat until all three (3) feet are removed.
3. Push foot onto tray
D
Repeat until all three (3) feet are locked into place.
4. Locate three (3) legs
locks into the lowest position. Repeat until all three (3) legs are locked into
the lowest position. Pull up on legs to make sure they are locked in place.
. Remove foot by squeezing tabs
D D
until it snaps into place.
A
A
D
. Push release button
B C
B
C
N
and
B
D
B
and rotate leg down until it
6
N
A
D