HERO PLEASURE+ XTEC 2021 Manual page 67

CAUTION
! !
Do not blow compressed air.
•
Do not wash using any solvent.
•
Pre oam f element
The pre foam element should be serviced at
(page 60)
regular intervals
frequently when riding in unusually wet or
dusty areas.
Cleaning
Wash the pre foam element in kerosene.
•
Spread 5ml (4 to 5 drops) of SAE 90
•
grade at different locations on pre foam
element.
WASH IN KEROSENE
SAE 90 Grade
•
Do not wring the filter element with both
hands.
•
•
. Service more
•
Installation
•
•
•
•
•
•
SQUEEZE
TO SPREAD OIL
64
Squeeze it in a manner so that oil will spread
on complete surface of pre foam element.
CAUTION
! !
NOTE
Replace air cleaner element once in every
15000 km or early replacement may be
required when riding in dusty areas.
At 12000 km inspect if air cleaner
(viscous type) is choked. If found choked,
replace the air cleaner element to keep the
engine healthy.
Replace pre foam element or viscous element
at any point of time, if found damage.
Clean the air cleaner sub assembly case (4)
using a shop towel.
Install the pre foam element.
Install the air cleaner element holder
component (new, in case of replacement).
Install the air cleaner cover.
Install the left floor side cover
left side body cover (page 42)
Install the
element
(page 44)
.
.