Acer X34GS Lifecycle Extension Manual page 8

This LCD monitor includes an interface board,
controls the TFT panel control logic, brightness control logic, and DC-DC conversion to supply the appropriate
power to the whole board and LCD panel then transmitting LVDS signals into LCD Module to drive the LCD
display circuit. The power board will provide the DC power to the interface board and LCD panel. The function key
board is used for OSD control, monitor power ON/OFF and the LED indicator for power status.
ITEM
HDMI (Digital Video Interface)
DP(Display Port)
Connectors
Power Consumption
User's Co n t r o l
Dimmin g control range (max-min/max) x 100%
Pre-Defined Timing
Plug and Play
Power Saving
Display Color
Response Time
1.3.1 Interface Connectors:
1.3.1.1 AC SOCKET
The AC inlet connector shall be an IEC/CEE-22 type male power receptacle for connection to mains
power. The power cord shall be black with length of 1.9±0.05 meters. The power cord type is different
from regions.
1.3.1.2 Analog Connector and Cable: The analog signal cable shall be black and 1800 mini-meters. The
analog VGA cable shall be a molded-over, shielded, triple row, 15 pins and blue color D type connector.
power board and a function key board. The interface board
Frequency Ranges
Max Pixel clock
Input Impedance
HDMI
Frequency Ranges
Max Pixel clock
Input Impedance
DP
DC Jack
Input connectors
100~240 Vac, 50~60Hz
Power Saving
Power Off
Buttons
Preset Timing
User's Timing
SPEC
31KHz~151KHz
H:
550MHz
MHz
100 Ω
HDMI 2.0
271KHz - 271KHz
H:
960MHz
100 Ω
DP 1.4
WAFER 2.5mm 4P 90' DIP
HDMI 19pinx2, DisplayPort
pin x1, Type-C 12-pinx1, Type-A 18-pinx4
180W(max)
< 0.5W
< 0.3W
POWER, hot key1, hot key2, input key, menu key
100%
15
16
VESA DDCCI
DPMS
8bit+A-FRC
OD Off :5ms/Nomal:3ms/Extreme:1ms
VRB Off :depending on OD
Setting/Normal:3ms/Extreme:1ms
48Hz~100Hz
V:
48Hz~180Hz
V:
20-pin x 2 Type-B 3.0 9-
,
8