Mini COUNTRYMAN Owner's Manual page 273

sporadically reach approx. 5 bar. Do not
switch off the compressor in this phase.
Checking and adjusting the tire
inflation pressure
Checking
1. Switch off the compressor.
2. Read the tire pressure on the tire pres-
sure display.
To continue the trip, a tire inflation pres-
sure of at least 2 bar must be reached.
Removing and stowing the sealant
bottle
1. Unscrew the filler hose of the sealant
bottle from the tire valve.
2. Press the red unlocking device.
3. Remove the sealant bottle from the com-
pressor.
4. Wrap and store the sealant bottle in
suitable material to avoid contamination
of the cargo area.
Minimum tire inflation pressure is not
reached
1. Pull the connector out of the power
socket in the vehicle interior.
2. Drive 33 ft/10 m forward and back to
distribute the sealing compound in the
tire.
Online Edition for Part no. 01405A541E1 - II/22
Wheels and tires
3. Screw the connection hose of the com-
pressor directly onto the tire valve stem.
4. Insert the connector into the power
socket in the vehicle interior.
5. With the ignition turned on or the en-
gine running, turn on the compressor
and let it run for a maximum of 10 mi-
nutes.
If a tire inflation pressure of at least
2 bar cannot be reached, contact a deal-
er's service center or another qualified
service center or repair shop.
If a tire inflation pressure of at least
2 bar is reached, see Minimum tire in-
flation pressure is reached.
6. Unscrew the connection hose of the
compressor from the tire valve.
7. Pull the connector out of the power
socket in the vehicle interior.
8. Stow the tire repair set in the vehicle.
MOBILITY
273