Mesh a Wi-Fi Network Among WA8021V5 Devices
Use a WA8021V5 as a router, and other WA8021V5 devices as mesh devices.
1 Install and power on the first WA8021V5 (that is, the Router WA8021V5), which is used as a
router. For details, see
2 Log in to the web page of the router WA8021V5 and complete the initial guide to confirm the
Wi-Fi name and password. For details, see How to change the Wi-Fi name, password and
management password of the WA8021V5? in FAQs.
3 Place the second WA8021V5 (that is, the mesh AP WA8021V5) near the router WA8021V5
(within 2m) and connect the power cable of the mesh AP WA8021V5 to a socket.
4 Wait about one minute after the mesh AP WA8021V5 is powered on.
5 Check the indicator status of the router WA8021V5. If the indicator of the router WA8021V5
blinks slowly, which indicates that it successfully discovered the mesh AP WA8021V5.
6 Press the pairing button of the router WA8021V5 once. The indicators of these two WA8021V5
devices will blink quickly.
Internet
Bridge ONT
Wait until the mesh AP WA8021V5 indicator turns steady white, which indicates that the
pairing is successful.
Working as a
Router.
Router WA8021V5
Mesh AP WA8021V5
< 2 m
Pairing button
Steady white
17
Mesh AP WA8021V5