System Connection - Kenwood DDX8034BT Installation Manual

System Connection

iPod
Accessory
2
To Relay Box
6
|
DNX9140//DDX814/DDX8034BT
iPod (commercially available)
USB terminal
USB device (commercially available)
Accessory
3
To MSN Direct Receiver KNA-M100 or
TMC Tuner GTM10 (optional accessory)
(DNX9140 only)
Audio input (iPod/AV input 3 switchable)
Resistance-free stereo type mini plug (3.5φ)
Visual input (iPod/AV input 3 switchable)
Resistance-free mini plug (3.5φ)
⁄
When connecting the MSN Direct Receiver
KNA-M100 (optional accessory) or TMC Tuner
GTM10 (optional accessory), put the cable
clamper (accessory %) to the back of this
unit first, and then wire the cable through the
Accessory 4
clamper.
Audio/Visual output
• Visual output (Yellow)
• Audio left output (White)
• Audio right output (Red)
Audio/Visual input
• Visual input (Yellow)
• Audio left input (White)
• Audio right input (Red)
Audio/Visual input
• Visual input (Yellow)
• Audio left input (White)
• Audio right input (Red)
Rear View Camera input
• Visual input (Yellow)
Front Preout
• Audio left output (White)
• Audio right output (Red)
Rear Preout
• Audio left output (White)
• Audio right output (Red)
Subwoofer Preout
• Audio left output (White)
• Audio right output (Red)
Center Preout
Accessory %
(DNX9140 only)