Page 2
The intention with this troubleshooting guide is to find a quick solution to problems with ZERO machines. If you are not able to find the answer to your question, please reach out to your nearest Aquaporin contact person or e-mail support@aquaporin.com.
Page 3
It is not recommended to use the flow restrictor, been installed correctly. A sticker on the ZERO which came in the box with ZERO, if the conditions clearly indicates where to insert the IN and where of the incoming water do not comply with the to insert the OUT.
Page 4
3 liters. The minimum refilling time will be about 10 minutes and will be affected by the PRE FILTER pressure and temperature of the incoming water to ZERO. In unfavorable conditions (use at the extreme end of the minimum conditions for use) Smaller Larger the filling of the tank can take up to 45 minutes.
Page 5
I taste chlorine in the purified water. Check that the presence of water inside or outside ZERO is not due to the movement of the pipes Chlorine taste in the purified water can have during installation or the modification of the two possible causes.
Page 6
If the hydraulic system where ZERO is installed compromise the normal operation of ZERO. can cause water hammers, it is necessary to install a pressure reducer before ZERO. It is also recommended to consider its origin and solving Change the cartridges and sanitizing on an the problem with your own home maintenance annual basis.
Page 7
ABOUT AQUAPORIN Aquaporin is a global water technology company dedicated to revolutionizing water purification, by merging biotechnological techniques and state-of-the-art engineering. We are the only company that incorporates aquaporins into water purification membranes. Learn more at aquaporin.com/zero Aquaporin A/S VAT No.: DK28315694 Nymøllevej 78...
Need help?
Do you have a question about the ZERO and is the answer not in the manual?
Questions and answers