Advertisement
2.2. REMOVAL OF CASSETTE TAPE
There are 2 ways to remove a cassette tape.
1. Service Information Display Operation
A. Press the FF and EJECT keys simultaneosly for 3 seconds and set the
Service Mode 7.
B. Press STOP key in order to rotate the Loading Motor for unloading
operation. (Pay an attention of tape slack)
2. Manual Operation
A. Disconnect the AC Mains Lead and remove the Top Panel.
B. Rotate the Main Cam Gear clockwise until the Loading Posts move to fully
unloaded position as shown in
Fig.
S10. (Tape is remaining)
Fig. S10
13
Advertisement
