Incite Fire Sigma-XT Setup
Hide thumbs
Also See for Sigma-XT:
- Installation and operation manual (9 pages) ,
- Installation and operation manual (12 pages)
Advertisement
Quick Links
Advertisement
Related Manuals for Incite Fire Sigma-XT
Summary of Contents for Incite Fire Sigma-XT
- Page 1 Sigma-XT Step by Step Set Up Australia Version 1...
- Page 2 Switch the “ENABLE CONTROL “003 KEYSWITCH “to the “Horizontal” position. Gently switch the “WRITE ENABLE” switch on the below extinguishing module to the “LEFT” *** To save the program move the “WRITE ENABLE” switch back to the “RIGHT” at any time during the following process*** ALL OF THE FOLLOWING PROCESSES ARE CONDUCTED VIA THE EXTINGUISHING MODULES DISPLAY AND BUTTONS.
- Page 3 Press “ENTER” to access the menu Screen Display Instructions LANGUAGE MODE LOCAL This is default and does not need to be changed EXT O/P MODE Common is the default To change – press “Enter” COMMON when it has the option you MAIN / RESERVE want press “Enter”...
- Page 4 Screen Display Instructions LAST ACTIVATION MODE ZONE 2 Zone 2 is default To Change – press “Enter” then “+” or “-“ to scroll to the appropriate zone then press “Enter” to accept the change ***Note if “Coincidence has been selected in previous menu, any two (2) zones in the range will initiate the extinguishing system*** ***Note if “Single”...
- Page 5 Screen Display Instructions SECOND STAGE ALARM PULSING / CONTINUOUS PULSED Pulsed is the default To change – press “Enter” when it has the option you want press “Enter” again to confirm ***Note: Setting the option for STEADY ACTIV. ALARMS is not compliant with AS7240*** Press “+”...
- Page 6 Press “+” Screen Display Instructions DISABLE EARTH FAULT MONITORING To change – press “Enter” EARTH FAULT ENABLED Enabled is the default when it has the option you want press “Enter” again to EARTH FAULT DISABLED confirm Press “+” DISABLE FAULT OUTPUT Fault output enabled is the To change –...
- Page 7 Sydney Block Y, Unit 1, 391 Park Road, REGENTS PARK NSW 2143 Mail: PO Box 508 GYMEA NSW 2227 Phone: 1300 INCITE (1300 462 483) | 02 9644 7144 Fax: 02 9644 7255 Email: sales@incitefire.com.au Technical support: support@incitefire.com.au Melbourne Address: Unit 120, 45 Gilby Road, MT WAVERLEY VIC 3149 Phone: 03 9544 2211 Fax: 03 9544 2212 Email: salesvic@incitefire.com.au...