Advertisement
2. Pry slightly to access the double-sided mounting tape (A) underneath the LCD panel
(B) and the LCD hinge. Then pull to detach the double-sided mounting tape from the
LCD cover. Repeat the same procedure to remove the double-sided mounting tape
on another side of the LCD panel and the LCD hinge
Figure 1-45. LCD Panel Removal
3. Carefully turn the LCD panel over so that the display panel is facing down on a flat
surface. Then detach the mylar tape (C) securing the eDP cable to the LCD panel
(Figure
1-46).
Figure 1-46. LCD Panel Removal
Disassembly Procedures
WEEE Annex VII Component:
LCD Panel
B
A
C
(Figure
1-45).
1-29
Advertisement
