Anderson NutriWrap 780 SB Operator's Manual

Double stretcher for wrapper
Hide thumbs Also See for NutriWrap 780 SB:

Advertisement

Quick Links

404644-2
Double stretcher for
780 SB wrapper
Operator's Manual
2015

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the NutriWrap 780 SB and is the answer not in the manual?

Questions and answers

Summary of Contents for Anderson NutriWrap 780 SB

  • Page 1 404644-2 Double stretcher for 780 SB wrapper Operator’s Manual 2015...
  • Page 3: Table Of Contents

    Table of contents To contact us Before you start Anderson limited warranty In this manual Introduction Safety and security measures Settings and Start-up Before you start Moving the wrapper Positioning of the double stretcher for wrapping Settings Adjustment for the height of the folding arm The angle of the stainless steel arm compared to the frame of the wrapper Erreur ! Signet non défini.
  • Page 5: To Contact Us

    Email: service@grpanderson.com Internet Site : www.grpanderson.com Before you start Before you start your Anderson machine, we strongly recommend that you: Read and understand the content of this manual; • Read and understand the content of the 780SB wrapper’s manual; •...
  • Page 7: Anderson Limited Warranty

    In no event will Anderson be liable for any incidental or consequential damages or • injuries, including but not limited to loss of profits, rental of substitute equipment, or other commercial or personal loss or damages arising as a result of a fundamental breach or breach of a fundamental term.
  • Page 8 Group Anderson Inc. (hereafter called ‘’Anderson’’). This outline is intended to assist you in awareness of Anderson’s Warranty Policies and to assure that you obtain the best service possible for your Anderson machine. Warranty is limited to 1-year (12months). This specified period begins on the date •...
  • Page 9 Anderson’s Responsibilities: In the event that parts must be shipped from Anderson, freight will be paid by • Anderson and will be shipped by the most economical means to arrive in the shortest possible time. Air, Next Day Air, Priority and other special shipment methods requested by the Dealer will be at the Customer’s expense.
  • Page 11: In This Manual

    780SB in a safe manner. Discharge Illustrations The illustrations in this manual are presented as references according to the available information at the time of printing. Anderson Group reserves the right to modify its machines without advance notice. Important notices Warning messages! Identify the information which must be read to avoid damaging the wrapper or the autopilot.
  • Page 13: Introduction

    1 Introduction Congratulations! You are the new owner of a double stretcher system for a 780SB Anderson wrapper, a quality machine built to allow your wrapper to wrap square and round bales at high speed. With the double stretcher, the 780SB wrapper can apply two layers of plastic at the same time in a uniform manner.
  • Page 15: Safety And Security Measures

    2 Safety and security measures The double stretcher for your Anderson 780SB wrapper was conceived to minimize risks to the operator. However you should never use it for any other purpose other than the one for which it was conceived. Misuse of this option or any other on the wrapper may cause serious injuries to the operator or other people nearby.
  • Page 16 Before making any repair or doing any maintenance on the machine or the double stretcher, turn off the engine and remove the key from the contact. Also be sure that the wrapper is in a stable position. Double Stretcher – Operator’s Manual Anderson Group...
  • Page 17: Settings And Start-Up

    When you have adjusted the arm to work for the type of bale you are wrapping, note which hole you are using. Anderson Group Double Stretcher – Operator’s Manual...
  • Page 18 Be sure that you are at a safe distance from the folding arm. It may drop quickly and cause injury if you are not careful. Warning! Figure 3 – Opening the hydraulic valve Double Stretcher – Operator’s Manual Anderson Group...
  • Page 19: Settings

    Then the drop off will rise and the rotating table will dump the bale from the wrapper. Anderson Group Double Stretcher – Operator’s Manual...
  • Page 20 Tighten the bolts: Figure 5 – Bolts for adjusting the folding arm Double Stretcher – Operator’s Manual Anderson Group...
  • Page 21: The Angle Of The Stainless Steel Arm Compared To The Ground

    Tighten the bolts when you have finished with the adjustment. Figure 6 – Bolts to adjust to change the angle of the stainless steel arm compared to the ground Anderson Group Double Stretcher – Operator’s Manual...
  • Page 23: Installing The Plastic Roll

    Warning! Both plastic cut and hold systems are on the same NOTE : hydraulic circuit. Thus they work at the same time. Anderson Group Double Stretcher – Operator’s Manual...
  • Page 24 If necessary, consult chapter 8 to learn how to clean the support of the plastic film. Install the new roll of plastic film as indicated in Figure 8. Figure 8 – Installing the plastic film in the stretcher sytstm Double Stretcher – Operator’s Manual Anderson Group...
  • Page 25 Figure 9 – Installing the plastic film in the plastic cut and hold Start the engine of the wrapper. Close the plastic cut and hold with the lever (Figure 10). The plastic film is now installed. Figure 10 – Plastic cut and hold lever Anderson Group Double Stretcher – Operator’s Manual...
  • Page 27: Adjusting During The Wrapping Of The First Bale

    (the rolls should be perpendicular to the frame). Figure 11 – Control lever to turn the table manually Anderson Group Double Stretcher – Operator’s Manual...
  • Page 28 If this is not the case please refer to the section 4 Settings. Double Stretcher – Operator’s Manual Anderson Group...
  • Page 29: Operation

    When you replace one roll of plastic you should replace the NOTE : second at the same time so that they empty at the same time. Anderson Group Double Stretcher – Operator’s Manual...
  • Page 31: Maintenance And Repairs

    Lengthen the bolt situated in the back of the black bumper on the cut and hold (Figure 12) so that it moves the rubber bumper towards the fingers of the plastic cut. They should now grab the plastic firmly. Anderson Group Double Stretcher – Operator’s Manual...
  • Page 32 If the first adjustment does not fix the problem you will have to adjust the tension of the spring of the plastic cut and hold (Figure 13) to put more pressure on the rubber bumper. Figure 13 – Adjustment for the spring of the cut and hold Double Stretcher – Operator’s Manual Anderson Group...
  • Page 33: Transport And Storage

    Remove the pin that holds the double stretcher pole in wrapping position. Fold back the arm and place it in transport/storage position (parallel to the frame of the wrapper). Insert the pin to secure the double stretcher pole into its transport position. Anderson Group Double Stretcher – Operator’s Manual...
  • Page 35: Trouble Shooting And Repair

    It also gives you solutions to resolve them. If your problem does not appear in this table or if you do not manage to resolve it by yourself, communicate with the Anderson service department (see section Introduction) at the beginning of this manual.
  • Page 36 ANDERSON GROUP 5125, rue de la Plaisance Chesterville (Québec) CANADA G0P 1J0 Email: service@grpanderson.com Telephone: 1-819-382-2952 Fax: 1-819-382-2218 www.grpanderson.com...

Table of Contents