BEMIS Flow Grove User Manual page 3

PLEASE OBSERVE THE FOLLOWING PRECAUTIONS
AND INSTRUCTIONS BEFORE INSTALLATION AND USE.
•
Powered by 4 AA batteries (not included).
Make sure to install the batteries properly (+/-).
•
Use a dry soft cloth to wipe the touch sensor as needed.
•
The sensor window indicator will flash every 3-4 seconds when the
battery is low. Replace the batteries as needed.
•
The faucet will automatically turn off when the batteries are depleted.
•
Immediately check for any leaks.
•
Continue to check for leaking throughout the
first hour of installation.
•
If leaking occurs, turn off water supply and
discontinue use immediately.
4 4 5