Installations-, Montage- und Ausrichtungsanweisungen genau. • Alle Anweisungen sollten befolgt werden, um technische Probleme zu vermeiden. • Jegliches elektrische oder magnetische Feld, das sich in der Nähe der SFA60 befindet, kann zu schlechtem Empfang führen oder sogar den Empfang verhindern.
Lieferumfang Nr . Symbol Teilename Abbildung Anzahl Antennen-Hauptteil Winkelhalterung Hauptstütze Fensterstütze Fensterhalterung Fixierungshalterung A Fixierungshalterung B Schraubenschlüssel...
Installation Indem man die Anweisungen Schritt für Schritt befolgt, ist es einfach, die SFA60 selbst oder mit Hilfe eines professionellen Antenneninstallateurs zu installieren. Vor dem Installieren Ihrer Antenne prüfen Sie bitte, ob alle unter „Lieferumfang“ genannten Teile in der Verpackung sind.
Schritt 2: Informationen überprüfen Um die Antenne zu installieren müssen Sie die richtige Schrägstellung (Sky), Höhe (Elevation) und den Azimuth- Winkel finden, wie in den letzten Seiten der Bedienungsanleitung angegeben. Wenn Sie lhren Standort in der Tabelle nicht finden, nehmen Sie bitte den der Ihnen am nächsten ist. Als Beispiel wird die Installation für den Astra 19,2 Satelliten in Hamburg gezeigt.
3) Standmontage Fixieren Sie die Antenne auf dem Stand (B5) mit der Schraube (S2) und (S4) und fixieren die Schraube (S4) mit der Mutter (N1). 4) Montage der Hauptstütze (B2) Befestigen Sie die Hauptstütze (B2) wie abgebildet mit den 2 Schrauben (S3) und (S2). 5) Wandmontage Sie müssen die Fixierungshalterung B (B6) an der Wand mit 4 Schrauben und Dübeln (nicht im Lieferumfang) montieren.
6) Balkon-/Mast-Montage Legen sie die Fixierungshalter (B5) und (B6) an das Geländer oder den Mast an und verbinden diese mit den Schrauben (S6) und fixieren diese mit den Muttern (N1). 7) Fenstermontage Schieben Sie die Fensterstütze (B3) auf die Hauptstütze (B2) und montieren Sie den Fixierungshalter B (B6) wie in Schritt 5 beschrieben.
Schritt 4: Ausrichtung der Satelliten-Antenne Die Sat-Antenne lässt sich mittels SAT-Finder oder mittels Softwaremenü des Receivers ausrichten. Wir empfehlen die Ausrichtung der Antenne mittels Sat-Finder. Verbinden Sie den Sat-Finder mit dem LNB und der Receiver- Zuleitung gemäß Bedienungsanleitung des Sat-Finders. Bewegen Sie die Antenne unter ständiger Beobachtung der Signalstärkeanzeigen (Tonhöhe) langsam östlich/ westlich.
Störungsbehebungs-Prüfliste für die Erstinstallation Wenn das Signal nicht gefunden wird, dann stellen Sie sicher, dass die Anweisungen in der Empfänger-Be- dienungsanleitung und der Antennen-Bedienungsanleitung genau befolgt worden sind, dazu prüfen Sie bitte Folgendes: • Stellen Sie sicher, dass sämtliche Kabelverbindungen intakt sind und jede Verbindung ordnungsgemäß sitzt/ festgeschraubt ist.
• All the instructions should be followed in order to avoid any technical problems. • Any electric or magnetic field close to the SFA60 may cause a bad reception or even cut off the signal completely. • Do not drill the plastic cover of the antenna, which seals the antenna from moisture.
Box Content Symbol Part name Image Quantity Antenna Body Angle Bracket Main Support Window Bracket A Window Bracket B Fix Bracket A Fix Bracket B Spanner...
Page 15
Symbol Part name Image Quantity Compass Pan Head M4x10 SEMS2 Hex Bolt M6x18 SEMS2 Hex Bolt M6x50 SEMS2 Round Head Square Neck Bolt M6x30 Round Head Square Neck Bolt M6x50 U-Bolt M6x85 Flanged Nut M6 Rubber...
Think about the way you might pass your cable in a discreet way from the SFA60 to your Set top Box. The antenna should not be too distant from your satellite receiver; a cable longer than 30 meters may decrease the quality of the signal.
Step 2: Check Information In order to install the antenna, you need to find skew, elevation and azimuth angle by referring to the table on the back of the manual. If you can’t find your location, please refer to the information of the nearest place from your location.
3) Stand mount Fix the antenna on the stand (B5) using the screws (S2) and (S4) and fix these with the nuts (N1). 4) Mounting of main support (B2) Install main support (B2) as shown in the picture with the two screws (S3) and (S2). 5) Wall mount Install mount B (B6) on the wall with 4 screws and wall plugs (not included).
6) Balkony/pole mount Align the mounts (B5) and (B6) around your balustrade or pole and connect these with the screws (S6) and fix them with the nuts (N1). 7) Window mount Insert the Window Mount (B3) around the main support (B2) and install the mount B (B6) as described in step 5. Fix the window mount (B4) with the screws (S5) and the nuts (N1) not too tight and insert the holder into your window frame.
Step 4: Aligning the Satellite Antenna The sat antenna can be aligned using the SAT FINDER or the receiver‘s software menu . We recommend antenna alignment via the sat finder. Connect the sat finder to the LNB and the receiver supply line according to the sat finder‘s operating instructions.
Troubleshooting Check List for Initial Installation If the signal is not found, be sure the receiver and antenna user manual have been followed closely, please check the following: • Make sure all cable connections are correct and each connection is properly connected. •...
Page 23
Türk ASTRA Astra Hotbird Atlantic Hispa Türk ASTRA Astra Hotbird Atlantic Hispa 2A-2D 1F-1H/ 6/7A/8 bird 3 2A-2D 1F-1H/ 6/7A/8 bird 3 2A, 3A KR/1L/ 2A, 3A KR/1L/ Euro Euro bird 1 bird 1 42,0 E 28,2 E 19,2 E 13,0 E 5,0 W 30,0 W...
Need help?
Do you have a question about the SFA60 and is the answer not in the manual?
Questions and answers