Table of Contents
Advertisement
Available languages
Available languages
GB
5) OPEN WINDOW DETECTION
The "Open Window" function detects when a window is open due to a sudden
decrease of the temperature in the room.
To set it activate the Stand-by mode, press the
for more than 3 seconds,
scroll the modes with the [+] key and select FUN with
.
The
icon will be active during the thermostat operation, if an open window
for a maximum of 30 minutes or until the temperature increases of
at least 1,5° C.
- "ASC" FUNCTION
In order to decrease energy consumption, this function allows to optimize
the operating times of the device. By activating this mode the device will
record the time needed to bring a room to the set temperature, adjusting
automatically its operation. This way the control will turn on later than the set
time, if it is possible to reach the desired temperature in less time than the one
programmed by the user.
To set this function:
- Activate "Stand-by" mode, press the
key for more than 3 seconds;
- Scroll through the modes with the [+] key and select "FUN" with the
key;
- Press it until the
icon appears on the upper part of the display;
- Use the [+] key to select "ON" or the [-] key to select "OFF" and
to "Stand-By" mode.
RESET THE DEVICE
To reset the device it is necessary to unplug it for at least 24 hours.
- 24 -
Advertisement
Table of Contents
