Name Plate - Nilfisk-Advance HydroDry Instructions For Use Manual

INTRODUCTION
This manual will help you get the most from your
This product is intended for commercial use only.
PARTS AND SERVICE
Repairs, when required, should be performed by your Authorized Service Center, who employs factory trained service personnel, and maintains an
inventory of original replacement parts and accessories.
Call the DEALER named below for repair parts or service. Please specify the Model and Serial Number when discussing your machine.
(Dealer, affi x service sticker here.)

NAME PLATE

The Model Number and Serial Number of your machine are shown on the Nameplate on the machine. This information is needed when ordering
repair parts for the machine. Use the space below to note the Model Number and Serial Number of your machine for future reference.
MODEL NUMBER ________________________________
SERIAL NUMBER _______________________________
UNCRATE THE MACHINE
When the machine is delivered, carefully inspect the shipping carton and the machine for damage. If damage is evident, save the shipping carton
so that it can be inspected. Contact the dealer immediately to fi le a freight damage claim.
TO OPERATE
Place and position the machine. This unit can be positioned fl at on fl oor or fl ip the Front Prop
(4)
into a properly grounded outlet and turn Power Switch
AFTER USE
For compact storage, this machine can be stacked with another. Wind the Power Cord (4) in a circle on the top of the machine. Be sure not to wind
the cord tighter than necessary.
Store the machine in a cool dry place. Avoid prolonged exposure of machine to freezing temperatures during storage or transporting.
KNOW YOUR MACHINE
1 Power Switch
2 Front Prop
3 Optional Handle Kit (includes rear wheels)
4 Power Cord
8 - FORM NO. 56041613 - HydroDry™
Blower Dryer
. Read it thoroughly before operating the machine.
(1)
to desired speed (1, 2 or 3).
(2)
down to lift the front slightly
.
Plug the Power Cord