Table of Contents
Advertisement
100000
80000
60000
40000
20000
11.2.
Shelf Life Average: shelf life at room temperature (25°C)
12. Soldering: Use only manual soldering for TPLC™ series Hybrid Capacitors. Soldering iron
temperature should not exceed 350°C and soldering time should not exceed 5 seconds.
12.1. Do not reflow solder: Exposure to infrared or convection reflow temperatures will
decrease electric performance of capacitors, and may cause the cell to swell, leak or
crack.
12.2. Do not wave solder: Wave soldering will cause shorting of the pins and irreparable
damage to the cell.
12.3. Do not wash boards after inclusion of TPLC cells: Board assembly should be
completed with all associated cleaning completed prior to adding the charged cells.
A secondary process to solder the TPLC cells should be performed with a No-Clean
flux, no additional cleaning should be done.
7520 Mission Valley Road ● San Diego, CA 92108-4400 ● USA ● Tel: 619.398.9700 ● Fax: 619.398.9777 ● www.tecategroup.com
9101840000.f.docx.INSERT DOC #DOCX
TPLC ESTIMATED LIFE
0
0
10
20
30
40
50
Temperature(℃)
60
70
80
PAGE 11
Advertisement
Table of Contents
