Advertisement
185mm
180mm
Range hood
mounting points
Auxiliary mounting
points
280mm
450
600
400
600
(Fig.5)
4.Using a 9mm drill bit, enlarge the pilot holes and insert the
plastic wall anchors (BB) into the wall along the line as
reference point. Insert screws and leave a 5mm(Fig.7) gap
between the wall and the back of the screw head to slide the
range hood into place. Ensure the screws and anchors (AA
and BB) are parallel with the horizontal line.
5.Hook the hood body(A) onto the screws( AA and BB)
mounted onto the wall and securely tighten the screws(
AA and BB) to secure the hood body(A) on the wall. Peel
off the backing and stick sponge strip to the front side
Fig.5
of the fan housing as shown(Fig.8)
12)
6.Install two additional hood body mounting screws
(AA) into the auxiliary mounting holes to secure the
hood body (A) in place.
Fig.6
5
Fig.7
7
Fig.8
Main mounting holes
Auxiliary mounting holes
Fig.9
Fig.10
7
7
Ducted mode
Advertisement
