Advertisement
Micom Function
2-12. Refrigerator LCD/LED/Magic Display demo function
1. The demo function of the refrigerator automatically runs on the refrigerator on exhibit to show how to operate and
use the LCD/LED/Magic Display function, and while this function is running, only the lamp and ice maker
operates.
2. To start the demo function on the refrigerator, open the refrigerator door and while keeping the temperature button
pressed, press the Express Freezing button 3 times until function starts with the Ding Ding Ding sound. To
cancel the demo function, repeat the same procedure of opening the refrigerator door and while keeping the
temperature button pressed, press the Express Freezing button 3 times.
(Only the Model applied Logic about Blackout, if the power is turned off and then turned on, the demo function will
be compensated.)
3. When the demo function is enabled, freezer and refrigerator temperature part will be shown as OFF but Express
Freezing button, power cool, automatic ice maker and lock/unlock functions will be displayed normally. When the
user presses the freezer and refrigerator button, the refrigerator will make the Ting button sound but the
temperature will not be set. But the remaining Express Freezing button/power cool, lock/unlock buttons will
operate normally. Also in the demo function, the lamp and all other loads (Compressor, fan motor, heater etc.)
will be turned off.
4. After the demo function is enabled, the OFF sign on the display will automatically be turned off in 20 seconds.
When a specific button is pressed of when the door is opened after the display has been turned off, the OFF
display will be shown again.
20
Advertisement
