Advertisement
Micom Function
2-1-6. Hygiene Filter replacement condition display function
1. There is a replacement indicator light for the Hygiene filter cartridge .
2. Hygiene filter in OFF Mode needs replacement once 24 months.
3. Hygiene filter in Auto Mode or Power Mode needs replacement once 12 months
4. When the Hygiene Filter Reset icon on,you must exchange the filter.
5. After replacing the filter,press and hold the Pure N Fresh button for more than 3 seconds.After then Hygiene Filter Reset
icon turn off with reset status.
Filter RESET
Classification
in OFF Mode
Filter Status
Display
2-1-6-1. AUTO Mode
1. Fan installed on the multi.duct on the rear side of the filter operates.
2. Fan is repeatedly turned on for 10 minutes and then off for 60 minutes.
3. If the R-door is opened while the fan is operating,the fan will be turned off,and when the R-door is closed,the fan will be
turned on.
4. LED near the filter installed on the multi duct is turned on when the R -door is opened and off when closed .
(LED is always turned off in OFF mode)
2-1-6-2. POWER Mode
1. Fan installed on the multi.duct on the rear side of the filter operates.
2. Fan is repeatedly turned on for 10 minutes and then off for 5 minutes for 4 hours,and then automatically switches over to
AUTO Mode.
3. If the R -door is opened while the fan is operating,the fan will be turned off,and when the R -door is closed,the fan will be
turned on.
4. LED near the filter installed on the multi duct is turned on when the R -d oor is opened and off when closed.
(LED is always turned off in OFF mode)
2-1-7. How to operate the Express Freeze function
1. Please select Express Freezing function for quick freezing.
2. When you press the Express Freezing button, the Express Freezing icon will be turned
on again.
3. Express Freezing function automatically turns off after a fixed time passes.
2-1-8. Dispenser use selection
1. You can select water,cube,crush by dispenser button.
2. When you press dispenser button,dispenser menu will be
changed.(crush
water
3. If you press dispenser pad with holding your cup in the dispenser
,water or ice will be dropped into your cup.
4. when after initially establishing the water comes out,the water tank
inside fills and until at the time of quality the hour is caught.
2-1-9. Ice Maker ON/OFF selection
1. You can set Ice Maker ON or OFF by Ice Maker ON/OFF button.
2. If you press and hold the button for 3 seconds,the state of Ice Maker will be
changed (OFF
ON,ON
3. If you set Ice Maker OFF,Ice Maker does not make Ice anymore.(but dispenser
auger moter will work).
Filter RESET
Icon ON
in Auto Mode
cube ).
OFF).
Icon On
Dispenser
button
Dispenser
PAD
16
Filter RESET
Icon ON
in Power Mode
Advertisement
