Verifying The Scanner; Cleaning The Scanner - ScanPrint SP5001 Installation And User Manual

4.4 Verifying the Scanner

To verify scanner operation:
Insert a betting slip into the scanner. The scanner features an anti-jam mechanism and rejects
1.
documents placed too close to one side.
Once scanned, examine the image displayed and ensure it matches the original.
2.
If the expected image is not displayed, try each of the following and retry the scan.
3.
Ensure that the slip has been inserted in the proper direction.
4.
Clean the scanner, and repeat the calibration procedure.
5.
If after several trials the expected image is still not obtained, the scanner is faulty and must
6.
be replaced.

4.5 Cleaning the Scanner

Perform the following cleaning procedure once a week whenever black lines appear on the
scanned image or when scanning errors occur.
Remove the scanner cover by holding the cover at both ends and pulling upwards.
Form input