Calibrating The Scanner; Testing The Scanner - ScanPrint SP5001 Installation And User Manual

4.2 Calibrating the Scanner

Scanners require calibration prior to use. Calibration involves inserting a blank piece of paper into
the scanner. The piece of paper should be A4 or letter format size and white; using other white
paper may result in scanning errors.
Select CAL from the EngBench2 menu bar.
1.
The Insert White Paper dialog box is displayed.
2.
Introduce the 223mm edge of the calibration paper into the scanner as shown below; making
3.
sure that the paper is properly centred.
While holding the calibration paper in the scanner input guide, click OK on the Insert White
4.
Paper dialog box.

4.3 Testing the Scanner

The EngBench2.exe utility is used to test and maintain the printer and scanner.
Using File Manager, locate and run EngBench2.exe. The application console is displayed. A status of
Init