Advertisement
Quick Links
Naples
Freestanding Baths
THIS PRODUCT MUST BE INSTALLED BY A QUALIFIED TRADESPERSON
Manufactured from premium sanitary grade acrylic, Oliveri's
freestanding baths are easy to install, with self-supporting,
adjustable feet and can be freely located anywhere in your
bathroom.
This manual is designed to provide the correct installation
steps and care advice, for a long-lasting installation.
Correct and proper use of your bath will ensure its
ongoing performance. Please consult the Caring for Your
Bath section below for advice on cleaning and regular
maintenance.
CARING FOR YOUR BATH
Oliveri uses the highest sanitary grade acrylic, however
naked flames, cigarettes or strong chemicals will
damage the bath and must be avoided and/or removed
immediately. To preserve the high gloss acrylic surface:
When filling the bath start with cold water to allow the
bath to gradually adapt to the changing temperature.
After using your bath, clean with a soft cloth and warm
soapy water to clean away any oils or soap, to prevent tide
marks and preserve the high-gloss surface.
Clean using warm soapy water and only mild liquid
detergents. Do not use powders, pastes, creams,
chemicals, window cleaning sprays or abrasive cleaners.
Scratches can be removed with a fine polish like Brasso.
Installation Instructions
STOP AND READ CAREFULLY
PRE-INSTALLATION CHECKS
Inspect the acrylic surface of the bath for
damage. Damage found after installation
is not covered by the manufacturer's
warranty conditions. ANY CLAIMS FOR
DAMAGE WILL NOT BE ACCEPTED AFTER
INSTALLATION.
Protect your bath before and during
installation. Scratches, cracks or other
surface damage sustained during or after
the installation are NOT COVERED BY
WARRANTY.
Installation must only be carried out by a
QUALIFIED TRADESMAN and in accordance
with building regulations and any local
authority requirements.
• 10 year warranty (see oliveri.com.au for details)
• Manufactured to AS/NZ Standard 2023/1995
• Adjustable self-supporting feet
• Central waste position (plug and waste not included)
TF151a - Naples Freestanding Bath Installation Instructions
Page 1 of 2
Advertisement
Related Manuals for Oliveri Naples
Summary of Contents for Oliveri Naples
- Page 1 Protect your bath before and during installation. Scratches, cracks or other CARING FOR YOUR BATH surface damage sustained during or after Oliveri uses the highest sanitary grade acrylic, however the installation are NOT COVERED BY naked flames, cigarettes or strong chemicals will WARRANTY.
- Page 2 10 years replacement product, 1 year labour. Where a genuine manufacturing defect arises within the warranty period Oliveri will, at its election, repair the defect or replace the product subject to the terms contained in the full warranty information available at https://oliveri.com.au/service-and-warranty.