Advertisement
Quick Links
Please read and save these instructions.
PACKAGE CONTENTS
F
Assembly and Installation
INSTRUCTIONS PERTAINING TO A RISK OF FIRE, OR INJURY TO PERSONS
IMPORTANT SAFETY INSTRUCTIONS.
Lighted lamp is HOT!
CAUTION: Safe for outdoor operation.
WARNING: To reduce the risk of FIRE OR INJURY TO PERSONS:
WARNING
or bulb protector.
WARNING: Install in accordance with all local codes and ordinances.
WARNING: To reduce the risk of FIRE OR INJURY TO PERSONS:
WARNING: Do not submerge the transformer.
WARNING: Do not use with a dimmer.
WARNING: Do not use an extension cord.
WARNING: There are no serviceable parts inside the power supply unit. DO NOT
DISASSEMBLE.
WARNING: Do not connect two or more transformers in parallel.
CAUTION: Plug the power supply unit directly into a GFCI outlet that is marked "wet
location". The maximum output of this transformer is 24 watts. Do not overload the
transformer. Be sure that the total cumulative wattage of all 12-volt fixtures connected
to the transformer is equal to or less than 24 watts. This garden light system must be
installed in accordance with all local codes and ordinances. If you are experiencing
WARNING: For use with 12-volt-low-voltage outdoor landscape lighting system only.
Not for use with submersible light or pool/spa equipment.
FOR LANDSCAPE LIGHTING SYSTEMS ONLY. OUTDOOR USE ONLY. THE DEVICE IS
ACCEPTED AS A COMPONENT OF A LANDSCAPE LIGHTING SYSTEM WHERE THE
SUITABILITY OF THE COMBINATION SHALL BE DETERMINED BY CSA OR LOCAL
INSPECTION AUTHORITIES HAVING JURISDICTION.
PATHLIGHT ETL LISTED UNDER MODEL # L08207.
A
B
G
C
D
E
H
I
1
Attaching and installing the pathlight
WARNING:
to insert the spike (D) into the ground.
Carefully remove the fixture from its protective packaging.
Install the plastic lenses (B) in the lante
post (D) to the body (C) and insert the spike (E) into the post (D).
Attach lamp cover (A) to the plastic lense (B) and turn them
clock wise.
F
2
Connecting the wires
WARNING: The wire connector (F) contacts have sharp edges for pie rcing the
main low-voltage cable. To avoid injury, do not touch the metal contacts.
WARNING: Risk of Electric Shock. Install all luminaires 10 ft. (3.05 m) or more
from a pool, spa or fountain.
CAUTION: The wire from the low-voltage power unit shall be 12-18 AWG type
underground low energy circuit cable or SPT2W.
IMPORTANT:
•
Protect the wiring by routing it in close proximity to the light fitting or next to a
building structu
re such as a house or deck.
• The landscape wire and connector can also be hidden under stone or buried
under grass at a maximum depth of 6 in. (15.24 cm).
•
- 1 -
Item #1006 684 101
Model #L08207
Use and Care Guide
HB 6PK LV BLACK PATH LIGHT
Part
Description
A
Lamp cover
B
Lens
C
Body
D
Post
E
Spike
F
Connector
G
12W transformer
Cable
H
I
Control box
rn body (C), attach the
A
B
C
D
E
Quantity
6
6
6
6
6
6
1
1
1
Advertisement
Related Manuals for HAMPTON BAY L08207
Summary of Contents for HAMPTON BAY L08207
- Page 1 INSPECTION AUTHORITIES HAVING JURISDICTION. main low-voltage cable. To avoid injury, do not touch the metal contacts. PATHLIGHT ETL LISTED UNDER MODEL # L08207. WARNING: Risk of Electric Shock. Install all luminaires 10 ft. (3.05 m) or more from a pool, spa or fountain.
- Page 2 Assembly and Installation (Continued) Align the low-voltage wire and fit it into the connector (F) bottom Connecting the cable to the transformer half as shown below. Press the top half of the connector into the bottom half until it clicks into place and is secure.
- Page 3 Care and Cleaning Do not use any cleaners with chemicals, solvents or harsh abrasives. Troubleshooting Problem Possible cause Solution • There is no power. • Check that the power is on. light. • There is a disconnection or break in •...