Jaybird X3 Manual
Also See for X3:

Advertisement

Jaybird X3 Manual

For detailed video instructions please visit javybirdsport.com/support/
Please refer to the safety warnings for important product safety information prior to installation or use of the product.

IN THE BOX


IN THE BOX
X3

USB Charging Cable + Charge Clip
USB Charging Cable + Charge Clip

Silicone Ear Fins (S, L)
Silicone Ear Fins (S, L)

Comply™ Isolation Ear Tips (S, M, L)
Comply™ Isolation Ear Tips (S, M, L)

Shirt Clip
Shirt Clip

Cord Clips
Cord Clips

Silicone Ear Tips (S, L)
Silicone Ear Tips (S, L)

Carry Pouch
Carry Pouch

CHARGING/BATTERY STATUS

We recommend you charge your buds through any 5V 500mA USB power source. Wall/car adapters/chargers that supply more than 5.5 Volt will damage your Jaybird buds and should not be used.

  1. Take your included charge clip and USB cable and plug it into a USB power source.
    CHARGING/BATTERY STATUS Step 1
  2. The red LED will show when charging, and will turn to green when fully charged.
    CHARGING/BATTERY STATUS Step 2

2.5 hours charging gives 8 hours of playtime.
20 mins charging gives 1 hour of play time.

  1. When not playing music, pressing Volume + or Volume – will announce the battery level.*
    CHARGING/BATTERY STATUS Step 3
  2. The LED will indicate a single green flash for more than 10% battery remaining and a single red flash when below 10%.
    CHARGING/BATTERY STATUS Step 4
  3. Your phone and the MySound App will also indicate battery status.

* Standby Mode: Powered and not playing music or on a phone call.

PAIRING

  1. On your phone/music device, turn Bluetooth on and ensure it is actively searching for Bluetooth devices.
    PAIRING Step 1
  2. With your X3 turned off, press and hold the Power Button until you see the LED flashing red/green. A voice prompt will say "SEARCHING FOR YOUR MUSIC DEVICE"
    PAIRING Step 2
  3. Select "Jaybird X3" in the list of discovered devices.
    PAIRING Step 3
  4. X3 voice prompt will say: "HEADPHONES CONNECTED". You are now ready to listen to your music
    PAIRING Step 4

If the pairing is not successful, switch off your buds by pressing the Power Button until you hear "POWER OFF" and repeat the steps outlined above.
NOTE: When you turn your X3 buds on for the first time or after a reset, they will be in pairing mode.

FINDING YOUR PERFECT FIT

CHOOSING YOUR SETUP BASED ON USE

OVER-EAR SPORT-FIT

We recommend choosing a fit based on how you plan to use your Jaybird X3.

OVER-EAR SPORT-FIT

SET UP YOUR FINS

  1. Lay your X3 in front of you with the inline remote on the left hand side. Swap the fins to the opposite side so the fin with the 'L' is now on the side with the inline remote.
    SET UP YOUR FINS Step 1
  2. Rotate the fins so they are pointing towards the cable, as shown.
    SET UP YOUR FINS Step 2
  3. Place your X3 over your ear with the inline remote on your left side.
    SET UP YOUR FINS Step 3

FINDING THE RIGHT SIZED TIPS AND FINS

  1. Starting with the medium-sized tips and fins attached, try placing your buds firmly within your ear while in the over-ear position.
    FINDING THE RIGHT SIZED TIPS AND FINS Step 1
  2. If your buds are not comfortable, or feel loose, try alternative sized tips and/or fins. You can also try the Comply™ foam tips or remove the fins completely. Be patient, it may take some time to get the perfect fit.
    FINDING THE RIGHT SIZED TIPS AND FINS Step 2
  3. Once you are happy with the fit, move onto step 3.
    FINDING THE RIGHT SIZED TIPS AND FINS Step 3

CORD CLIPS

  1. Lay your X3 in front of you and fit the cord clips as shown.
    CORD CLIPS Step 1
  2. Find the right cord length to get a snug fit, with no excess slack, around the back of your head by pulling the top and bottom cord outwards.
  3. Insert the last loop into the cord clip and pull firmly.
    CORD CLIPS Step 2

CORD CLIPS Step 3

UNDER-EAR CASUAL-FIT

If you intend to use Jaybird X3 for casual use, we recommend the under-ear setup.

UNDER-EAR CASUAL-FIT

FINDING THE RIGHT SIZED TIPS AND FINS

  1. With the medium-sized tips and fins attached, place your buds firmly within your ear while in the under-ear position. The inline remote should be on the right side.
    FINDING THE RIGHT SIZED TIPS AND FINS Step 1
  2. If your buds are not comfortable, or feel loose, try alternative sized tips and/or fins. You can also try the Comply™ foam tips or remove the fins completely. Be patient, it may take some time to get the perfect fit.
    FINDING THE RIGHT SIZED TIPS AND FINS Step 2
  3. Once you are happy with the fit, you are good to go.
    FINDING THE RIGHT SIZED TIPS AND FINS Step 3

SHIRT CLIP

Use the included Shirt clip To secure your X3 buds to the back of your shirt.

SHIRT CLIP Step 1

Long side of the clip on the outside of the shirt.

SHIRT CLIP Step 2

DETAILED INSTRUCTIONS

BUTTON FUNCTIONALITY

4 SEC PRESS

BUTTON FUNCTIONALITY

  1. ON/OFF
    To turn X3 on or off, press and hold the Power Button for about 4 seconds. A voice prompt will say "POWER ON" or "POWER OFF".

PLAYING MUSIC

SHORT PRESS
1 SEC PRESS

PLAYING MUSIC

  1. VOLUME +
    SKIP FORWARD
  2. PLAY / PAUSE
    VOICE COMMANDS
  3. VOLUME -
    SKIP BACKWARD

Play or pause, a song or video with a short press and release of the Power Button.
To skip a song, press the Vol. + button for 1 second.
To go backwards, press the Vol. - button for 1 second.
To change the volume + or -, short press the Vol. + or Vol. - button
To activate voice commands, (Siri or Google Now), press the Power Button for 1 second.

PHONE CALLS

SHORT PRESS
1 SEC PRESS
DOUBLE PRESS

PHONE CALLS

  1. SWITCH A CALL
  2. ACCEPT A CALL
    DECLINE A CALL
    REDIAL
  3. MUTE / UNMUTE

Accept a phone call, with a short press of the Power Button.
To decline a phone call, press the Power Button for 1 second.
To mute or unmute, a call press the Vol. - button for 1 second.
To redial, a phone number you can double press the Power Button.*
To switch a call from your phone speaker to your X3 buds short press the Vol. + button.

*Standby Mode: Powered and not playing music or on a phone call.

THE MYSOUND APP

MySound lets you customize the sound profile on your X3 buds.

Your new sound settings are saved right on your buds, so you can take your custom sound with you no matter where you go with any device you use.

THE MYSOUND APP Step 1

THE MYSOUND APP Step 2

  1. SOUND
    Customize your sound settings. Changes are saved to your X3 buds.
  2. MUSIC
    Indicates if music is playing on your device.
  3. DISCOVER
    Discover presets from athletes and other users.
  4. SAVE
    Save your new preset to your dashboard for easy access to all your favorite sound settings.
  5. HISTORY
    Track through a history of your changes.
  6. DEVICE
    See your connected device and battery status.

NOTE: The MySound app works with Jaybird X3 and Freedom. Other manufacturers and older Jaybird buds are not supported.
Adding additional bass to your sound profile through the MySound app will reduce play time.

MULTIPOINT - CONNECTION TO MULTIPLE DEVICES

Multipoint allows you to be connected to two devices simultaneously. You can for instance be connected to your laptop and your mobile phone. While listening to music on your laptop you will be able to accept an incoming call on your phone.

  1. Ensure your X3 buds are paired and connected to both devices.
  2. Make sure that only the two devices you want to connect to are turned on and in proximity.

Your X3 can remember up to eight paired Bluetooth ® devices and can be actively connected two devices at a time.

MULTIPOINT - CONNECTION TO MULTIPLE DEVICES

SHARE ME

The ShareMe feature allows you to share the music you are listening to with another pair of X3 buds.

  1. Power on both pairs of X3 buds.
    SHARE ME Step 1
  2. Only connect one device to your music device. Ensure the second device is not connected to any Bluetooth device.
    SHARE ME Step 2
  3. Press and hold 'VOL +' on the connected buds, while you press and hold the 'VOL -' on the second buds until the LEDs on both buds are flashing red/green.
    SHARE ME Step 3
  4. Both buds will be connected when the LEDs stop flashing and you will hear 'Headphones Connected'. Play some music and enjoy the shared experience.
    SHARE ME Step 4

SMARTWATCHES

With the right smartwatch you can leave your phone at home. Just sync music to your smartwatch and pair X3 to your smartwatch. Use your smartwatch user manual for instructions on how to pair a Bluetooth device.

Apple WatchOS
Apple WatchOS

Samsung Tizen
Samsung Tizen

Android Wear
Android Wear

TROUBLESHOOTING

If your buds are not responding, connect the charge clip and USB cable to a power source. This will turn your buds off and perform a soft reset.

If this does not resolve your problem we recommend to reset your buds to their original factory Settings.

  1. Put your buds in pairing mode. Turn the buds off, then press and hold the Power Button for more than 4 sec until you see alternating red/green LED.
    TROUBLESHOOTING Step 1
  2. While the LED is flashing red / green double press the Power Button.
    TROUBLESHOOTING Step 2
  3. The LED will turn orange and your buds will turn off.
    TROUBLESHOOTING Step 3

NOTE: Once your buds have been reset you will have to pair it again to your devices. Select "FORGET" or "REMOVE" Jaybird X3 from your device's Bluetooth menu. Follow the pairing instructions to repair your devices.

SPECIFICATIONS

Bluetooth Version 4.1, Multipoint
Codec AAC, SBC, Modified SBC
Profile Handsfree, Headset, A2DP, AVCRP, SPP
Effective Range 10 meters (30 feet)
Play Time 8 Hrs*
Standby Time 110 Hrs*
Power Bluetooth headset: 5.0V ⎓, 0.5A
Charging Time 2.5 Hrs
Quick Charge 20 Min = 1 Hr play time
Dimensions 27 x 24 mm earbud size, 490 mm cord length
Weight Approx 13 g

* Play time and standby time may vary due to usage conditions. Adding additional bass to your sound profile through the MySound app will reduce play time.

WARRANTY, WARNINGS & SAFETY

Full warranty, care & maintenance details at: jaybirdsport.com/warranty +1.866.244.3399


Due to the isolating characteristics of these headphones do not use while driving, riding a bike or where vehicular traffic is present, or in any other activity where failure to hear surrounding sounds could be dangerous. Use of these headphones at excessive volumes may cause permanent hearing damage. Always turn the volume down before use. Take caution in regards to inserting objects into ear canal, use at own risk. Do not wear the device while it is connected to a power source driven from main 110V or 220V lines.
Copyright 2016 Jaybird, LLC. All rights reserved. Jaybird, and the Jaybird logo are trademarks of Jaybird, LLC. Bluetooth is a trademark owned by Bluetooth SIG, Inc. USA, and licensed to Jaybird, LLC. iPhone, iPad and iPod are trademarks of Apple, Inc., registered in the US and other countries and App Store is a service mark of Apple Inc. All other trademarks are the property of their respective owners. Android is a trademark of Google Inc. in the United States and other countries. Manufactured under Freebit patent numbers EP2177045, US8630436, US8976995 and corresponding international patents. Assembled in Malaysia.

EARTIP CLEANING
Keeping your Jaybird Buds eartips clean is essential for safe, hygienic use.

DO NOT attempt to clean the eartips without first removing them from the headphones. Getting the delicate circuitry inside your Jaybird Buds wet may cause permanent damage.

  1. Firmly grip the eartip with one hand and the earphone with the other. Carefully remove the eartip from the bud.
  2. Use warm water and mild soap on a damp cloth to remove dirt and earwax from the eartip. Do NOT use harsh cleaning agents.
  3. Rinse and completely dry your eartip before placing them back on your buds.
  4. Carefully push the eartips back onto the buds.

LISTEN RESPONSIBLY
Avoid excessive volume levels and prolonged periods of listening. Prolonged listening at excessive volume levels may cause permanent hearing disability.
Do not use around road traffic.
Video instructions at jaybirdsport.com

Brand

Videos

Jaybird X3 Review Video

Documents / Resources

References

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Jaybird X3 Manual

Advertisement

Need Assistance?

Do you have a question about the X3 that isn't answered in the manual? Leave your question here.

Error while submitting your question. Please, reload page and try again.

Thank you! Your question has been received!

Table of Contents