Tranya T10 Earbuds Manual

PACKAGE LIST

Wireless Earbud * 2
Magnetic Charging Case * 1

User Manual * 1

Ear Tips * 3 (S/M/L)

Type-C Charging Cable * 1

IMPORTANT NOTES

1. Register your product on www.tranya.com to get an EXTRA three-month warranty for free.
2. Before using the T10 wireless earbuds, please charge both the case and earbuds.
3. We provide three pairs of rubber eartips (including the set installed on the earbuds), please choose the best fit for you.
   
4. If both earbuds don't sync together, please reset the earbuds.
5. If the earbuds don't charge, please clean the charging slot on the case and the contact surface on the earbuds.
   

TOUCH CONTROL

Play / Pause		Press and hold for 1 second (L/R)
Next/Previous track		Tap three times (R/L)
Volume up/down		Tap twice (R/L)
Activate Siri/other voice control software		Tap 4 times(L/R)
Reject/End a call		Press and hold for 1 second (R/L)
Answer a call		Tap (L/R)
Game Mode (Automatically return to normal mode after power off)		Tap 5 times(R)
Normal Mode/ Bass Boosted Mode		Press 5 times(L)

Switch Sound Effects

Two different sound effects on the T10: Normal Mode and Bass Boosted Mode. The Normal Mode is for those who prefer a sound with bright vocal and crisp treble. The Bass Boosted Mode is for those who prefer a warm, heavy bass.

POWER ON

Automatically

Manually (Long press and hold for 4 seconds)

POWER OFF

Automatically

Manually (Long press and hold for 4 seconds)

Note: When the charging case is at low battery or out of power, the earbuds will not automatically power on/off, please turn them on/off manually.

WEARING

1. Put the earbuds into your ears.
   
2. Rotate the earbuds to auricle side to fit snugly.
   

CONNECT THE EARBUDS

1. Power on the earbuds and turn on the Bluetooth in your phone.
   
2. Select "Tranya T10" and confirm.
   

CHARGING

1. Charging the Earbuds
   
2. Charging the Case
   

HOW TO RESET THE EARBUDS

If your earbuds stop syncing with each other, please follow the below steps to reset the earbuds:

1. Pick up both earbuds and turn them off;
2. Press and hold BOTH earbuds up to 6-8s until the red lights blink;
   
3. The earbuds will sync together and enter the pairing mode automatically.
   

FAQ

Why does signal interruption occur in some places, such as along the railway and the airpot?

There are usually lots of underground cable lines along the places mentioned above, which might cause electonmagnetic interference and result in the siganal interruption.

My earbuds don't charge, what can I do?

Please try to follow the below steps:

1. Clean the charging slot on charging case.
   
2. Clean the charging connector on earbuds.
   

Why my earbuds don't power on/off automatically?

The earbuds would not power off automatically when the case is at low battery or out of power. Please recharge the case. And you can long press for four seconds to power on and long press for four seconds to power off the earbuds.

Will the Bluetooth mouse cause the signal interference?

Perhaps. When your Bluetooth mouse and earbuds are connected to the same device, it might happen.

WARRANTY

SCAN QR CODE FOR EXTENDED WARRANTY
15-MONTH EXTENDED WARRANTY ACTIVATE WITHIN 14 DAYS
tranya.com/pages/register-product
Email: support@tranya.com

For more information, please visit:
www.tranya.com

For any assistance, email us:
support@tranya.com

Made in China

Videos

Tranya T10 - Full Review (Music & Mic Samples) Video

Documents / Resources

References

• Tranya | Best Budget Truly Wireless Earbuds & Smartwatches
• Register Product – Tranya

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Tranya T10 Earbuds Manual