Advertisement

HALO Laser Rangefinder Universal Manual

GETTING STARTED

  1. Locate the battery compartment below the eyepiece or on the right-hand side of the unit. Flip the tab to create a small handle and turn counterclockwise, or press the tension tab toward the front of the unit and lift to remove the lid.
    GETTING STARTED Step 1
  2. Insert the CR2 battery, or two AAA batteries into the compartment. The CR2 battery should be installed negative side facing in and positive side facing the cap.
    GETTING STARTED Step 2
  3. Put the lid back in the compartment and turn clockwise or angle in and press down the lid to close the battery compartment.
    GETTING STARTED Step 3
  4. To install the lanyard, locate the hole on the bottom or rear of the rangefinder. Insert one end of the lanyard through the hole. Push the longer end through the small loop and pull taut to secure.
    GETTING STARTED Step 4
  5. Locate and press the power button briefly to turn the unit on.
    GETTING STARTED Step 5
  6. To focus the unit, locate the adjustable eye piece. Turn left or right until the image in the range finder comes into focus.
    GETTING STARTED Step 6

CHANGING MODES

CHANGING MODES Step 1

CHANGING MODES Step 2

Pressing the "Mode" button will toggle between the following modes:

  1. LOS (Line of Sight) Distance in Yards
  2. AI™ Distance in Yards
  3. LOS Distance in Meters
  4. AI™ Distance in Meters

Note: Not all Halo rangefinders are equipped with Angle Intelligence™ Technology. Verify your model's capabilities for relevance of this section.

LOS Distance in Yards

When in this mode, the Line of Sight distance in yards is the only information displayed on the screen.

LOS Distance in Yards mode gives an accurate normal distance to target.

LOS Distance in Yards Standard Reticle
Standard Reticle

LOS Distance in Yards XLR2000 Reticle
XLR2000 Reticle

AI™ Distance in Yards

When in this mode, the True Distance in yards and vertical angle are displayed on the screen.

AI Distance in Yards mode compensates for the angle of incline or decline in terrain to give an accurate distance to target.

AI™ Distance in Yards Standard Reticle
Standard Reticle

AI™ Distance in Yards XLR2000 Reticle
XLR2000 Reticle

LOS Distance in Meters

When in this mode, the Line of Sight in meters is displayed on the screen. Normal Distance in Meters mode gives an accurate normal distance to target.

LOS Distance in Meters Standard Reticle
Standard Reticle

LOS Distance in Meters XLR2000 Reticle
XLR2000 Reticle

AI™ Distance in Meters

When in this mode, the True Distance in meters and vertical angle are displayed on the screen. AI Distance in Meters mode compensates for the angle of incline or decline in terrain to give an accurate distance to target.

AI™ Distance in Meters Standard Reticle
Standard Reticle

AI™ Distance in Meters XLR2000 Reticle
XLR2000 Reticle

RANGING

Press and release the Start button one time to start ranging. When the unit is done measuring, the data will be displayed on the screen. LCD display shown with Distance in Yards Mode on.

RANGING Standard Reticle
Standard Reticle

RANGING XLR2000 Reticle
XLR2000 Reticle

Note: If target is out of range or a measurement was not obtained the unit will display "- - - -" on the screen.

RANGING If target is out of range

LOW BATTERY

The battery indicator is always shown. The battery level can be constantly monitored.

LOW BATTERY Standard Reticle
Standard Reticle

LOW BATTERY XLR2000 Reticle
XLR2000 Reticle

Note: Unit will automatically power off after 6 seconds of button inactivity.

CLEANING

To clean the lenses use the cleaning cloth provided with the laser rangefinder. Use a circular motion when cleaning the lenses with the cleaning cloth.

If you use anything other than the cleaning cloth, make sure that is soft and not coarse, as this may scratch the lenses.

You may also use isopropyl alcohol to clean the lens, but always apply it to a soft cloth first and never directly on the lens itself.

WARRANTY

DISCLAIMER: WGI Innovations, LTD is not responsible for damage, expense or injury caused by the unauthorized use of, alterations to, improper connection of and abuse or neglect of the WGI Innovations™ products.

WARRANTY: For the warranty to be in effect, register your product at halooptics.com. Follow the on screen directions to complete the process.

WGI Innovations, LTD will replace all workmanship defects free of charge for ONE (1) YEAR after the date of purchase as long as your warranty is in effect. This warranty DOES NOT COVER damage, expense or injury caused by unauthorized repairs, alterations, improper connection, shipping, abuse, theft, accident, neglect or collateral loss. When returning product(s) for service you MUST obtain a Return Merchandise Authorization (RMA) number from WGI Innovations, LTD. Please include name, UPS address (no P.O. Box), telephone number, RMA number and a complete description of the problem on all enclosed correspondence. When possible, pack product carefully in original carton. Customers are responsible for any shipping cost to WGI Innovations™. WGI Innovations™ will pay the shipping cost of replacement product to the customer, but is not responsible for damage incurred in returning items for repair.

For product service send to:
WGI Innovations™
2261 Morganza Hwy
New Roads, LA 70760
(800) 847-8269

CUSTOMER SERVICE

WGI Innovations, LTD. stands behind every product we manufacture for a one-year product workmanship warranty and a strong commitment to customer service. If you are in need of customer service for missing parts or need assistance with the operation or assembly of your product, we encourage you to call one of our customer service representatives and let us assist you.

DISCLAIMER

WGI Innovations, LTD reserves the right to make changes to product features, functionality and physical design at its sole discretion. As a result, such changes may not be reflected in this version of the manual.

FCC

Product Name: Laser Rangefinder
Trade Name: Wildgame Innovations

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two criteria: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.


Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

REGULATORY DISCLOSURES


use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.

Class 3R Laser Product

This product complies with IEC 60825-1:2014-05 Ed.2.0 & with 21CFR 1040.10 & 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007. Max. Output: 0.1 µJ.104HZ. 905.0nm.

REGULATORY DISCLOSURES

602 Fountain Parkway
Grand Prairie, TX 75050
(800) 847-8269
halooptics.com

Brand

"Halo" is a trademark of WGI Innovations, LTD.

Videos

Halo Optics XL600 Rangefinder - Review Video

Documents / Resources

References

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download HALO Laser Rangefinder Universal Manual

Advertisement

Need help?

Need help?

Do you have a question about the Laser Rangefinder and is the answer not in the manual?

Questions and answers

Table of Contents