Polaroid CUBE HD Action Camera Manual

What's in the Box

Polaroid Cube™ HD Action Camera

Micro USB Cable

User Guide

Warranty

Get to Know Your Polaroid Cube™ Camera

Top View

Back View

1. Lens
2. Microphone
3. Magnet
4. Multifunction Button
5. LED
6. Controls Cover
7. Micro SD Slot
8. 720p/1080p Switch
9. Micro USB Port

Using Your Polaroid Cube™ Camera

On
Hold the multifunction button for three seconds. You'll hear three beeps and the LED will blink green. All set!

Off
Hold multifunction button for three seconds. You'll hear a two second beep, followed by a single short beep. Power is off.

Still Photos
Press the multifunction button once. You'll hear a beep and the LED will blink red once.

Video
Double press the multifunction button. You'll hear two beeps and the LED will blink red until you stop recording. To stop recording, press the button once again. You'll hear a single beep and the LED will blink green.

Select Your Resolution
You have the option of capturing video at either 720p or 1080p. 1080p gives you more detail in a higher resolution image, but uses more storage space on your camera and shortens the battery life. To Select: Using a coin or other flat object, turn the controls cover counterclockwise to open. Set the 720p/1080p switch to your preferred setting. Turn the controls cover clockwise to close.

Insert a Memory Card
Your Polaroid Cube camera can accommodate micro SD cards with storage capacities up to 32GB. Using a coin or other flat object, turn controls cover counterclockwise to open. Insert card into slot and gently push in until you hear a click. Turn the cover clockwise to close. To remove a card, gently push the card in, release and the card will slide back out. Note: We suggest using SD cards Class 10 and above. Cards lower than Class 6 are of a lesser quality and may cause slower recording/reading speed as well as other unexpected issues.

Connect to Your Computer
Insert the included Micro USB cable into the Micro USB port and the other end into your computer. Double-click the Polaroid Cube camera when it appears on the desktop. The indicator will blink orange to show that your computer is accessing the camera's memory card. Your still photos and videos are located in the DCIM folder.

Launch Your Settings Application

1. Windows users: Double-click on the PolaroidCube.exe file.
2. Mac users: Double-click the PolaroidCube.app.zip file, then double-click the Polaroid Cube icon.
   In the application, you can change the settings for Light Frequency, Timestamp, Cycle Recording, Date & Time and Buzzer Volume.

Note: QuickTime player is required for video files to play back audio correctly.

Charging
When battery reaches 10%, four beeps will sound and the LED will turn orange. If battery reaches 0%, you'll hear a two second beep followed by a short beep, just before the camera shuts down. To recharge, plug one end of the included Micro USB cable into the Micro USB port and the other into either a computer or into a wall plug (using a wall adaptor). The camera can be used while charging with a wall adapter. When plugged into a computer, the LED will glow bright green when your Polaroid Cube camera is fully charged.

Disclaimer: During extended use, your Polaroid Cube camera may feel warm to the touch. This is a normal operating occurrence and does not indicate any product defect or reason to slow down the fun.

Have questions? Need technical support? Want to know more? Get in touch at:
cspolaroid@camarketing.com
www.polaroidcube.com

Videos

Polaroid Cube - Full Review with Sample Clips Video

Polaroid CUBE - How To Disassemble Video

Documents / Resources

References

• Polaroid Cube – Meet Polaroid

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Polaroid CUBE HD Action Camera Manual