KanguruFCRW
LCD during Duplicate and Verify
1. During a Duplicate and Verify session the LCD will display the same
information as a normal duplication up until the verification begins. When the
duplication is complete the LCD will start the % over from 00 to 99. (Fig4a.)
When this function is finished the LCD will display a successful duplication or
an error code for a failure. (Fig4b.)
Fig4a.
Fig4b.
LCD During CD-RW Erasing
1. If you want to reuse a CD-RW disc, you first must erase any data previously
burned onto the disc. During this process the LCD will display the screen
pictured in Fig5.
Fig 5.
- 17 -